[RG-ES211GS-P] Reyee RG-ES211GS-P 11-Port Gigabit Smart Cloud-Managed PoE Switch, 8 PoE+, 1 SFP, 120 W

Reyee RG-ES211GS-P 11-Port Gigabit Smart Cloud-Managed PoE Switch, 8 PoE+, 1 SFP, 120 W

Part number RG-ES211GS-P

8 x 10/100/1000BASE-T PoE+ ports (IEEE 802.3af/at), 2 x Gigabit RJ45 ports, 120 W PoE budget
1 x 1GE SFP port for flexible uplink
Cost-effective switch with IPC recognition for enhanced CCTV network value
Smart protection (AI failover) for service continuity
Perpetual PoE: uninterrupted PoE power supply during warm restart
Lifetime management on Ruijie Cloud anytime, anywhere, plus eWeb and Ruijie Reyee App
PoE watchdog, port isolation, storm control and DHCP snooping; fanless metal case

PoE Gigabit Smart Managed Cloud Managed SFP Reyee Ruijie

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-ES211GS-P_Datasheet.pdf Download

Overview of Reyee RG-ES211GS-P

The Reyee RG-ES211GS-P is an 11-port Gigabit smart cloud-managed PoE switch with 8 PoE+ ports, 2 Gigabit RJ45 ports and 1 Gigabit SFP uplink. Its 120 W IEEE 802.3af/at budget powers IP cameras, Wi-Fi access points and IP phones in retail stores, clinics, villas, schools and small offices. Perpetual PoE keeps devices powered during warm restarts, PoE watchdog revives frozen devices and IPC recognition simplifies CCTV maintenance. It offers 22 Gbps switching capacity, 16K MAC entries, 32 VLANs, static aggregation, port isolation, storm control and DHCP snooping, with lifetime management on Ruijie Cloud, eWeb or the Ruijie Reyee App. The fanless metal case mounts on a desk or wall.

Technical Specifications – Reyee RG-ES211GS-P

Product Information

Product Category	Layer 2
Warranty	3 years

Port Specifications

Total number of RJ45 ports	10
Total number of optical ports	1
Number of 1GE SFP ports	1
Number of 10/100/1000BASE-T ports	10
Reset button	1
DIP switch	LED mode switch toggled to left (Mode 1): The port LED status indicates the status of traffic transmission. Solid green means that the port is link up, while blinking green means that the port is transmitting and receiving data. LED mode switch toggled to right (Mode 2): The port LED status indicates the PoE status. Solid green means that the port is supplying power, while blinking green means that the port is in power overload state.

Power Supply and Consumption

PoE Out standard	PoE/PoE+ (IEEE 802.3af/at)
Number of PoE/PoE+ Out ports	8
PoE budget	120 W
PoE power pins	1–2 (+), 3–6 (-)
Power input	DC adapter: Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Rated input current: 2 A; Output: Rated output voltage: 54 V DC; Maximum output current: 2.5 A
Maximum power consumption	8.5 W (with no PoE load); 128.5 W (with full PoE load)
Power supply	DC power adapter

System Specifications

Flash memory	8 MB
Forwarding rate	16.37 Mpps
Switching capacity	22 Gbps

Dimensions and Weight

Casing	Metal
Product dimensions (W x D x H)	205 mm x 105 mm x 28 mm (8.07 in. x 4.13 in. x 1.10 in.)
Weight	0.45 kg (0.99 lbs) (without packaging materials)
Shipping weight	1.36 kg (3.00 lbs)

Environment and Reliability

Fan	Fanless design
Cooling	Natural cooling
Mounting options	Wall/Desk
Hot swapping of cables	Hot swapping supported by the service port and power connector
MTBF	200,000 hours
Operating temperature	0°C to 40°C (32°F to 104°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	10% RH to 90% RH (non-condensing)
Storage humidity	5% RH to 95% RH (non-condensing)
Altitude	–500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
ESD protection	Air discharge: 8 kV; Contact discharge: 6 kV
Surge protection	Service port: ±6 kV for common mode; Power connector: ±4 kV for common mode and ±2 kV for differential mode

Certification and Regulatory Compliance

EMC	EN 55032, EN IEC 61000-3-2, EN 61000-3-3, EN 55035, EN 300 386
Safety compliance	EN 62368-1, IEC 62368-1
Certification	CE, CB

Basic Configurations

PoE watchdog	Yes
Uninterruptible power supply upon warm start	Yes
Online upgrade	Yes

Ethernet Switching

Maximum number of VLANs	32
Maximum number of MAC address entries	16000
Interface flow control	Yes
IEEE 802.1Q VLAN	Yes
Static MAC address	Yes
Static aggregation	Yes
Inbound or outbound rate limiting based on interface traffic	Yes

Interface

Jumbo frame length (MTU)	10240 bytes
EEE	Yes
Cable test	Yes

IP Service

IPv4 ping	Yes
DNS client	Yes
DHCP client	Yes

Network Management and Monitoring

Mirroring	Yes
HTTP login	Yes
HTTPS login	Yes
SON	Yes
Camera detection	Yes
eWeb management	Yes
Ruijie Cloud management	Yes
Ruijie Reyee App management	Yes

Security

Port isolation	Yes
Broadcast storm control	Yes
Multicast storm control	Yes
Unknown unicast storm control	Yes
DHCP snooping	Yes
CPU Protection Policy	Yes

System Performance Capacity

Recommended camera limit	200W H265: 100; 400W H265: 50

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-ES206MG-P Reyee RG-ES206MG-P 5-Port 2.5G Cloud Managed PoE Switch, 4 PoE+, 10G SFP+ Uplink, 70 W ⃁ 467.77

RG-ES207GS-HP Reyee RG-ES207GS-HP 7-Port Gigabit Cloud-Managed PoE++ Switch, 2 PoE++ + 2 PoE+, SFP, 120 W ⃁ 450.46

RG-ES209GC-P Reyee RG-ES209GC-P 9-Port Gigabit Smart Cloud-Managed PoE Switch, 8 PoE+, 120 W ⃁ 575.20

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.