[RG-ES206MG-P] Reyee RG-ES206MG-P 5-Port 2.5G Cloud Managed PoE Switch, 4 PoE+, 10G SFP+ Uplink, 70 W

Reyee RG-ES206MG-P 5-Port 2.5G Cloud Managed PoE Switch, 4 PoE+, 10G SFP+ Uplink, 70 W

Part number RG-ES206MG-P

5 x 2.5G ports and 1 x 10GE SFP+ port for higher network performance
4 x PoE out ports supporting IEEE 802.3af/at standards, 70 W PoE budget
Aggregation of up to 4 ports, unlocking higher network speed
Cost-effective smart cloud managed switch
Lifetime free cloud management on Ruijie Cloud anytime, anywhere, plus eWeb and Ruijie Reyee App
PoE watchdog, camera detection, port isolation, storm control and DHCP snooping
Fanless metal design for desk or wall mounting, LED mode switch for traffic/PoE status

PoE Cloud Managed Multi-Gigabit SFP Reyee Ruijie

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-ES206MG-P_Datasheet.pdf Download

Overview of Reyee RG-ES206MG-P

The Reyee RG-ES206MG-P is a 5-port 2.5G smart cloud-managed PoE switch with a 10GE SFP+ uplink, built for networks that outgrow Gigabit, such as Wi-Fi 6 access points, high-resolution cameras and busy offices, hotels and villas. It provides 4 x 2.5G PoE+ ports, 1 x 2.5G port supporting IEEE 802.3af/at with a 70 W budget, and port aggregation of up to 4 ports for higher speed. With 45 Gbps switching capacity, PoE watchdog, camera detection, 802.1Q VLAN, port isolation, storm control and DHCP snooping, it combines performance with protection. Management is free for life on Ruijie Cloud, or locally via eWeb and the Ruijie Reyee App. The fanless metal case suits desk or wall installation.

Technical Specifications – Reyee RG-ES206MG-P

Product Information

Product Category	Layer 2
Warranty	3 years

Port Specifications

Total number of RJ45 ports	5
Total number of optical ports	1
Number of 10GE SFP+ ports	1
Number of 10/100/1000/2500BASE-T ports	5
Reset button	1
DIP switch	LED mode switch toggled to left (Mode 1): The port LED status indicates the status of traffic transmission. Solid green means that the port is link up, while blinking green means that the port is transmitting and receiving data. LED mode switch toggled to right (Mode 2): The port LED status indicates the PoE status. Solid green means that the port is supplying power, while blinking green means that the port is in power overload state.

Power Supply and Consumption

PoE Out standard	PoE/PoE+ (IEEE 802.3af/at)
Number of PoE/PoE+ Out ports	4
PoE budget	70 W
PoE power pins	1–2 (+), 3–6 (-)
Power input	DC adapter: Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Rated input current: 1.5 A; Output: Rated output voltage: 54 V DC; Maximum output current: 1.48 A
Maximum power consumption	5.5 W (with no PoE load); 75.5 W (with full PoE load)
Power supply	DC power adapter

System Specifications

Flash memory	4 MB
Forwarding rate	33.75 Mpps
Switching capacity	45 Gbps

Dimensions and Weight

Casing	Metal
Product dimensions (W x D x H)	172 mm x 90.8 mm x 28 mm (6.77 in. x 3.57 in. x 1.1 in.)
Weight	0.49 kg (1.08 lbs) (without packaging materials); 1.39 kg (3.06 lbs) (with packaging materials)
Shipping weight	1.39 kg (3.06 lbs)

Environment and Reliability

Fan	Fanless design
Cooling	Natural cooling
Mounting options	Wall/Desk
Hot swapping of cables	Hot swapping supported by the service port and power connector
MTBF	200,000 hours
Operating temperature	0°C to 40°C (32°F to 104°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	10% RH to 90% RH (non-condensing)
Storage humidity	5% RH to 95% RH (non-condensing)
Altitude	–500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
ESD protection	Air discharge: 8 kV; Contact discharge: 6 kV
Surge protection	Service port: ±4 kV for common mode; Power connector: ±4 kV for common mode and ±4 kV for differential mode

Certification and Regulatory Compliance

EMC	EN 55032, EN 61000-3-2, EN 61000-3-3, EN 55035, EN 300 386
Safety compliance	EN 62638-1
Certification	CE

Basic Configurations

PoE watchdog	Yes
Online upgrade	Yes

Ethernet Switching

Maximum number of VLANs	16
Maximum number of MAC address entries	4000
Interface flow control	Yes
IEEE 802.1Q VLAN	Yes
VLAN configuration supported on LAN ports	Yes
Static MAC address	Yes
Static aggregation	Yes
Inbound or outbound rate limiting based on interface traffic	Yes

Interface

Jumbo frame length (MTU)	9216 bytes
EEE	Yes
Cable test	Yes

IP Service

DNS client	Yes
DHCP client	Yes

Network Management and Monitoring

Mirroring	Yes
HTTP login	Yes
SON	Yes
Camera detection	Yes
eWeb management	Yes
Ruijie Cloud management	Yes
Ruijie Reyee App management	Yes

Security

Port isolation	Yes
Broadcast storm control	Yes
Multicast storm control	Yes
Unknown unicast storm control	Yes
DHCP snooping	Yes
CPU Protection Policy	Yes

System Performance Capacity

Recommended camera limit	200W H265: 70; 400W H265: 35

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-ES207GS-HP Reyee RG-ES207GS-HP 7-Port Gigabit Cloud-Managed PoE++ Switch, 2 PoE++ + 2 PoE+, SFP, 120 W ⃁ 450.46

RG-ES209GC-P Reyee RG-ES209GC-P 9-Port Gigabit Smart Cloud-Managed PoE Switch, 8 PoE+, 120 W ⃁ 575.20

RG-ES211GS-LP Reyee RG-ES211GS-LP 11-Port Gigabit Smart Cloud-Managed PoE Switch, 8 PoE+, 1 SFP, 70 W ⃁ 355.18

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.