[RG-ES110GS-P-L] Reyee RG-ES110GS-P-L 10-Port Gigabit Unmanaged PoE Switch, 8 x PoE+, 1 SFP, 120 W

Reyee RG-ES110GS-P-L 10-Port Gigabit Unmanaged PoE Switch, 8 x PoE+, 1 SFP, 120 W

Part number RG-ES110GS-P-L

9-port 10/100/1000 Mbps unmanaged PoE switch with 1 SFP uplink, 8 PoE+ ports (120 W)
1 x 1GE SFP port plus 1 gigabit RJ45 uplink for fiber or copper connection to the NVR/core
Unmanaged switch, which is visible on Ruijie Cloud (requires at least one managed switch on the same network)
Intelligent and secure CCTV network: PoE auto recovery (PoE watchdog) and port isolation mode
Extend mode: ports 1 to 8 run at 10 Mbps for transmission up to 200 m over Cat5e
Intelligent PoE management: IEEE 802.3af/at, up to 30 W per port, 120 W total PoE budget
Recommended camera limit: 35 (200W H265) / 17 (400W H265)
High-quality fanless metal design for wall or desk mounting; plug and play, 3 years warranty

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-ES110GS-P-L_Datasheet.pdf Download

Overview of Reyee RG-ES110GS-P-L

The Ruijie Reyee RG-ES110GS-P-L is a gigabit unmanaged PoE switch with nine 10/100/1000 Mbps RJ45 ports and one 1GE SFP uplink. Eight PoE+ ports share a 120 W budget to power IP cameras, Wi-Fi access points and IP phones in villas, retail stores, warehouses, schools, clinics and offices. The SFP port allows a fiber link to a distant NVR or core switch, and 20 Gbps switching capacity with 9216-byte jumbo frames supports high-resolution video. A DIP switch provides Extend mode up to 200 m over Cat5e and Isolation mode, and PoE watchdog recovers stalled devices. The fanless metal unit is plug and play and carries a three-year warranty.

Technical Specifications – Reyee RG-ES110GS-P-L

Product Information

Product Category	Layer 2
Warranty	3 years

Port Specifications

Total number of RJ45 ports	9
Total number of optical ports	1
Number of 1GE SFP ports	1
Number of 10/100/1000BASE-T ports	9
Ultra-long-haul transmission	Yes
DIP switch	Extend mode: The rate of Ports 1 to 8 is reduced to 10 Mbps, but the maximum transmission distance can be up to 200 meters (Cat5e cables required). Flow control on. Default mode: All ports can communicate with each other. Flow control on. Isolation mode: Ports 1 to 8 cannot communicate with each other, but they can communicate with ports 9 and 10. Flow control on.

Power Supply and Consumption

PoE Out standard	PoE/PoE+ (IEEE 802.3af/at)
Number of PoE Out ports	8
Number of PoE/PoE+ Out ports	8
PoE budget	120 W
PoE power pins	1–2 (+), 3–6 (-)
Power input	220 V AC power supply: Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Rated input current: 3 A
Maximum power consumption	10 W (with no PoE load); 130 W (with PoE full load)
Power supply	Fixed power supply

System Specifications

Flash memory	2 MB
Forwarding rate	14.8 Mpps
Switching capacity	20 Gbps(bit/s)

Dimensions and Weight

Casing	Metal
Product dimensions (W x D x H)	190 mm x 150 mm x 43 mm (7.48 in. x 5.91 in. x 1.69 in.)
Weight	0.97 kg (2.14 lbs) (without packaging materials); 1.44 kg (3.17 lbs) (with packaging materials)
Shipping weight	1.44 kg (3.17 lbs)

Environment and Reliability

Fan	Fanless design
Cooling	Natural cooling
Mounting options	Wall/Desk
Hot swapping of cables	Hot swapping supported by the service port and power connector
MTBF	200,000 hours
Operating temperature	0°C to 45°C (32°F to 113°F)
Storage temperature	-40°C to +70°C (-40°F to +158°F)
Operating humidity	10% RH to 90% RH (non-condensing)
Storage humidity	5% RH to 95% RH (non-condensing)
Altitude	-500 m to +5,000 m (-1,640.42 ft. to +16,404.20 ft.)
ESD protection	Air discharge: 8 kV; Contact discharge: 6 kV
Surge protection	Service port: ± 4 kV for common mode; Power connector: ± 6 kV for common mode and ± 4 kV for differential mode

Certification and Regulatory Compliance

EMC	EN 55032, EN IEC 61000-3-2, EN 61000-3-3, EN 55035, EN 300 386
Safety compliance	EN 62368-1, IEC 62368-1
Certification	CE, CB

Basic Configurations

PoE watchdog	Yes

Ethernet Switching

Maximum number of MAC address entries	4000
Interface flow control	Yes
LLDP	No

Interface

Jumbo frame length (MTU)	9216 bytes

Security

Port isolation	Yes

System Performance Capacity

Recommended camera limit	200W H265: 35; 400W H265: 17

Package Contents

Contents	Device x 1; Power cord x 1 (0.8 m, 1 m, 1.2 m or 1.5 m, per actual delivery); User Manual x 1; Warranty Card x 1

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-ES106F-P Reyee RG-ES106F-P 6-Port 10/100 Mbps Unmanaged PoE Switch, 4 x PoE+, 54 W ⃁ 152.46

RG-ES110F-P Reyee RG-ES110F-P 10-Port 10/100 Mbps Unmanaged PoE Switch, 8 x PoE+, 110 W ⃁ 285.88

RG-ES110FG-P Reyee RG-ES110FG-P 10-Port Unmanaged PoE Switch, 8 PoE+ FE, 2 GE Uplinks, 110 W ⃁ 400.21

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.