[RG-ES106F-P] Reyee RG-ES106F-P 6-Port 10/100 Mbps Unmanaged PoE Switch, 4 x PoE+, 54 W

Reyee RG-ES106F-P 6-Port 10/100 Mbps Unmanaged PoE Switch, 4 x PoE+, 54 W

Part number RG-ES106F-P

6-port 10/100 Mbps unmanaged switch with 4 PoE+ ports (54 W)
Unmanaged switch, which is visible on Ruijie Cloud (requires at least one managed switch on the same network)
Intelligent and secure CCTV network: PoE auto recovery (PoE watchdog) and port isolation mode
Extend mode: ports 1 to 4 run at 10 Mbps for transmission up to 200 m over Cat5e
Intelligent PoE management: IEEE 802.3af/at, up to 30 W per port, 54 W total PoE budget
Recommended camera limit: 20 (200W H265) / 10 (400W H265)
High-quality fanless metal design for wall or desk mounting; plug and play, 3 years warranty

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-ES106F-P_Datasheet.pdf Download

Overview of Reyee RG-ES106F-P

The Ruijie Reyee RG-ES106F-P is a 6-port 10/100 Mbps unmanaged switch with four PoE+ ports and a 54 W PoE budget, built for small CCTV and IP phone deployments in villas, shops, clinics and offices. Ports 1-4 deliver IEEE 802.3af/at power up to 30 W per device, while ports 5 and 6 serve as uplinks to an NVR or router. A DIP switch selects Extend mode for camera runs up to 200 m over Cat5e or Isolation mode for a more secure network, and PoE watchdog automatically recovers unresponsive cameras. The fanless metal unit is plug and play, visible on Ruijie Cloud alongside a managed Reyee switch, and covered by a three-year warranty.

Technical Specifications – Reyee RG-ES106F-P

Product Information

Product Category	Layer 2
Warranty	3 years

Port Specifications

Total number of RJ45 ports	6
Number of 10/100BASE-T ports	6
Ultra-long-haul transmission	Yes
DIP switch	Extend mode: The rate of Ports 1 to 4 is reduced to 10 Mbps, but the maximum transmission distance can be up to 200 meters (Cat5e cables required). Flow control on. Default mode: All ports can communicate with each other. Flow control on. Isolation mode: Ports 1 to 4 cannot communicate with each other, but they can communicate with ports 5 and 6. Flow control on.

Power Supply and Consumption

PoE Out standard	PoE/PoE+ (IEEE 802.3af/at)
Number of PoE Out ports	4
Number of PoE/PoE+ Out ports	4
PoE budget	54 W
PoE power pins	1–2 (+), 3–6 (-)
Power input	220 V AC power supply: Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Rated input current: 2 A
Maximum power consumption	6 W (with no PoE load); 60 W (with PoE full load)
Power supply	Fixed power supply

System Specifications

Flash memory	2 MB
Forwarding rate	0.9 Mpps
Switching capacity	1.2 Gbps(bit/s)

Dimensions and Weight

Casing	Metal
Product dimensions (W x D x H)	166 mm x 132.6 mm x 43 mm (6.54 in. x 5.22 in. x 1.69 in.)
Weight	0.65 kg (1.43 lbs) (without packaging materials); 0.96 kg (2.12 lbs) (with packaging materials)
Shipping weight	0.96 kg (2.12 lbs)

Environment and Reliability

Fan	Fanless design
Cooling	Natural cooling
Mounting options	Wall/Desk
Hot swapping of cables	Hot swapping supported by the service port and power connector
MTBF	200,000 hours
Operating temperature	0°C to 45°C (32°F to 113°F)
Storage temperature	-40°C to +70°C (-40°F to +158°F)
Operating humidity	10% RH to 90% RH (non-condensing)
Storage humidity	5% RH to 95% RH (non-condensing)
Altitude	-500 m to +5,000 m (-1,640.42 ft. to +16,404.20 ft.)
ESD protection	Air discharge: 8 kV; Contact discharge: 6 kV
Surge protection	Service port: ± 4 kV for common mode; Power connector: ± 6 kV for common mode and ± 6 kV for differential mode

Certification and Regulatory Compliance

EMC	EN 55032, EN IEC 61000-3-2, EN 61000-3-3, EN 55035, EN 300 386
Safety compliance	EN 62368-1, IEC 62368-1
Certification	CE, CB

Basic Configurations

PoE watchdog	Yes

Ethernet Switching

Maximum number of MAC address entries	2000
Interface flow control	Yes
LLDP	No

Interface

Jumbo frame length (MTU)	2048 bytes

Security

Port isolation	Yes

System Performance Capacity

Recommended camera limit	200W H265: 20; 400W H265: 10

Package Contents

Contents	Device x 1; Power cord x 1 (0.8 m, 1 m, 1.2 m or 1.5 m, per actual delivery); User Manual x 1; Warranty Card x 1

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-ES103F-P Reyee RG-ES103F-P 3-Port PoE-In Unmanaged Switch, 2 x PoE+ Out, 30 W Budget ⃁ 65.83

RG-ES110F-P Reyee RG-ES110F-P 10-Port 10/100 Mbps Unmanaged PoE Switch, 8 x PoE+, 110 W ⃁ 285.88

RG-ES110FG-P Reyee RG-ES110FG-P 10-Port Unmanaged PoE Switch, 8 PoE+ FE, 2 GE Uplinks, 110 W ⃁ 400.21

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.