Reyee RG-NBS7006 Layer 3 Chassis Cloud Managed Switch, 6 Line Card Slots, 1.92 Tbps

Part number RG-NBS7006

Modular design provides scalability and flexibility: 2 supervisor module slots, 6 line card slots and 4 system power module slots
High-level redundancy, ensuring nonstop service, with 2 hot-swappable fan modules
1.92 Tbps switching capacity and 1428.48 Mpps forwarding rate
Layer 3 features: static routing, OSPFv2/OSPFv3, DHCP server and relay; VCS with 2 members
Security: 802.1X, RADIUS, ACLs, DHCP snooping, ARP anti-spoofing, IP source guard and CPU protection
Whole network solution specially designed for SMB scenarios
Lifetime management on Ruijie Cloud anytime, anywhere, plus eWeb and Ruijie Reyee App

Modular Cloud Managed Layer 3 Redundant Power Reyee Ruijie

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-NBS7006_Datasheet.pdf Download

Overview of Reyee RG-NBS7006

The Reyee RG-NBS7006 is a Layer 3 chassis cloud managed switch designed as the high-capacity core of a whole-network solution for SMB and campus scenarios. It offers 2 supervisor module slots, 6 line card slots and 4 system power module slots, with port types and quantities defined by the installed line cards. Delivering 1.92 Tbps switching capacity and 1428.48 Mpps forwarding rate, with VCS, OSPF and static routing, two hot-swappable fan modules and comprehensive security policies, it suits large hotels, hospitals, universities, malls and industrial facilities. The chassis is supplied without power modules and line cards. Ruijie Cloud provides lifetime remote management.

Technical Specifications – Reyee RG-NBS7006

Product Information

Product Category	Layer 3
Warranty	5 years

Port Specifications

Module slots	2 supervisor module slots; 6 line card slots; 4 system power module slots
Total number of RJ45 ports	Determine the quantity based on the type and number of line cards.
Number of 10GE SFP+ ports	Determine the quantity based on the type and number of line cards.
Number of 10/100/1000BASE-T ports	Determine the quantity based on the type and number of line cards.
Reset button	1

Power Supply and Consumption

Power supply	Power module
Power input	RG-PA600I-FS (AC input): rated 100 V AC to 240 V AC, 50/60 Hz; max. 90 V AC to 264 V AC, 47 Hz to 63 Hz; max. input current 10 A
Maximum power consumption	100 W
Power output	RG-PA600I-FS: 12 V DC output voltage, 50 A maximum output current (90 V AC to 290 V AC input)

System Specifications

RAM	Supervisor module/Line card: 1 GB DDR3
Flash memory	Supervisor module/Line card: 256 MB
Forwarding rate	1428.48 Mpps
Switching capacity	1.92 Tbps (bit/s)

Dimensions and Weight

Casing	Metal
Product dimensions (W x D x H)	Chassis without cable management bracket: 442 mm x 410 mm x 396 mm (17.4 in. x 16.14 in. x 15.59 in.); EA card and CM card: 438.5 mm x 196 mm x 40.2 mm (17.26 in. x 7.72 in. x 1.58 in.)
Weight	25 kg (55.12 lbs) (empty chassis with two fan modules, without packaging materials)
Shipping weight	30 kg (66.14 lbs) (including packaging materials, empty chassis and two fan modules)

Environment and Reliability

Hot swapping of fan modules	Yes
Fan	2 x fan modules (2 x fan modules for factory delivery)
Cooling	Device: air cooling, front-to-rear + left-to-rear + right-to-rear airflow; Line card: right-to-rear airflow; Power module: front-to-rear + side-to-rear airflow
Acoustic noise	35°C (95°F): 55 dB; 50°C (122°F): 78 dB
Mounting options	Rack
Hot swapping of cables	Power connectors, all ports of line cards, and all ports of the supervisor module support hot swapping of cables.
MTBF	400,000 hours
Operating temperature	0°C to +50°C (32°F to 122°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	10% RH to 90% RH (non-condensing)
Altitude	Operating altitude: –500 m to +5,000 m; Storage altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
ESD protection	Contact discharge: 6 kV; Air discharge: 8 kV
Surge protection	Service port: ±6 kV for common mode; Power connector: ±6 kV for both common mode and differential mode

Certification and Regulatory Compliance

EMC	EN 55032, EN 61000-3-2, EN 61000-3-3, EN 55035, EN 300 386
Safety compliance	IEC 62368-1
Certification	CE

Authentication

802.1X authentication	Yes (port-based and MAC address-based)
RADIUS	Yes
Guest VLAN	Yes

Ethernet Switching

Maximum number of VLANs	4094
Maximum number of MAC address entries	32000
Voice VLAN	Yes
STP/RSTP/MSTP	Yes
LLDP/LLDP-MED	Yes
Static aggregation / LACP	Yes

Gateway Features

QoS (802.1p/DSCP, SP, WRR, SP+WRR)	Yes

Interface

Jumbo frame length (MTU)	9216 bytes (interface configuration mode)

IP Routing

Maximum number of IPv4 static routes	2000
IPv6 routing table size (network route)	2000
Maximum number of IPv6 static routes	500
OSPFv2/OSPFv3	Yes

IP Service

Maximum number of ARP entries	8000
IPv4 routing table size (host route)	12000
DHCP server	Yes
DHCP relay	Yes

Multicast

IGMP snooping (v1/v2/v3)	Yes

Network Management and Monitoring

Fan speed adjustment	Intelligent speed adjustment
Port mirroring	Yes
Camera detection	Yes
eWeb management	Yes
Ruijie Cloud management	Yes
Ruijie Reyee App management	Yes
SNMPv1, v2c, and v3	Yes

Reliability

Number of VCS members	2
System dual backup	Yes
ERPS	No

Security

Maximum number of ACEs	Inbound: 1900 ACEs per interface; Outbound: 0
Port isolation	Yes
Storm control (broadcast/multicast/unknown unicast)	Yes
DHCP snooping	Yes
ACL (standard, extended MAC, extended IP, IPv6)	Yes
IP-MAC-port binding	Yes
ARP anti-spoofing	Yes
IP source guard	Yes
CPU Protection Policy	Yes

System Performance Capacity

Recommended camera limit	Number of line cards x recommended cameras per line card; per line card: 200 W H265: 400, 400 W H265: 200; supervisor module: not supported

Package Contents

Rack-mount bracket	2
Grounding cable	1 x 2 m (6.56 ft.)
Screw	12 x M6 x 16 mm and 18 x M3 x 10 mm cross recessed countersunk head screws; 12 x M6 cage nuts

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-NBS6002 Reyee RG-NBS6002 Layer 3 Modular Cloud Managed Switch, 2 Service Slots, 2 Power Slots ⃁ 4,261.87

RG-NBS7003 Reyee RG-NBS7003 Layer 3 Chassis Cloud Managed Switch, 3 Slots, 960 Gbps ⃁ 6,273.76

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.