[RG-NBS6002] Reyee RG-NBS6002 Layer 3 Modular Cloud Managed Switch, 2 Service Slots, 2 Power Slots

Reyee RG-NBS6002 Layer 3 Modular Cloud Managed Switch, 2 Service Slots, 2 Power Slots

Part number RG-NBS6002

Modular design provides scalability and flexibility: 2 service slots, 2 power slots and 2 fans
High-level redundancy, ensuring nonstop service
Whole network solution specially designed for SMB scenarios
176 Gbps switching capacity and 130.94 Mpps forwarding rate
Port quantity (RJ45 / 10GE SFP+) determined by the type and number of line cards installed
Lifetime management on Ruijie Cloud anytime, anywhere

Modular Cloud Managed Layer 3 Redundant Power Reyee Ruijie

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Overview of Reyee RG-NBS6002

The Reyee RG-NBS6002 is a Layer 3 cloud managed modular switch with 2 service slots, 2 power slots and 2 fans, designed as the core of a whole-network solution for SMB scenarios. Its modular design lets you choose line cards to match the required number of Gigabit RJ45 and 10G SFP+ ports, providing scalability and flexibility as the network grows. High-level redundancy helps ensure nonstop service, and 176 Gbps switching capacity supports demanding traffic in offices, hotels, schools, hospitals, factories and retail chains. Lifetime Ruijie Cloud management, port isolation, storm control and 6 kV surge protection simplify operations and protect the network.

Technical Specifications – Reyee RG-NBS6002

Product Information

Product Category	Layer 3
Warranty	5 years

Port Specifications

Module slots	2 service slots, 2 power slots, 2 fans
Total number of RJ45 ports	Determine the quantity based on the type and number of line cards.
Number of 10GE SFP+ ports	Determine the quantity based on the type and number of line cards.
Number of 10/100/1000BASE-T ports	Determine the quantity based on the type and number of line cards.
Number of 1GE SFP ports	No

System Specifications

Forwarding rate	130.94 Mpps
Switching capacity	176 Gbps (bit/s)

Environment and Reliability

MTBF	400,000 hours
Operating temperature	0°C to +50°C (32°F to 122°F)
Altitude	Operating altitude: –500 m to +5,000 m; Storage altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
Surge protection	Service port: ±6 kV for common mode; Power connector: ±6 kV for both common mode and differential mode

Basic Configurations

PoE watchdog	No

Interface

Jumbo frame length (MTU)	9216 bytes (interface configuration mode)

Security

Port isolation	Yes
Broadcast storm control	Yes

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-NBS7003 Reyee RG-NBS7003 Layer 3 Chassis Cloud Managed Switch, 3 Slots, 960 Gbps ⃁ 6,273.76

RG-NBS7006 Reyee RG-NBS7006 Layer 3 Chassis Cloud Managed Switch, 6 Line Card Slots, 1.92 Tbps ⃁ 12,446.26

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.