[RG-NBS5300-8MG2XS-UP] Reyee RG-NBS5300-8MG2XS-UP 10-Port Multi-Gigabit Layer 3 Switch, 8 x 2.5G PoE++, 2 SFP+

Reyee RG-NBS5300-8MG2XS-UP 10-Port Multi-Gigabit Layer 3 Switch, 8 x 2.5G PoE++, 2 SFP+

Part number RG-NBS5300-8MG2XS-UP

10-port Multi-Gigabit Layer 3 managed switch: 8 x 10/100/1000/2500BASE-T ports and 2 x 10GE SFP+ uplinks
2.5 Gbps ports smash the gigabit barrier and unlock the full potential of Wi-Fi 6 APs
802.3bt/at/af-compliant PoE++ on all 8 ports with a total power supply of 370 W and PoE watchdog
80 Gbps switching capacity and 59.52 Mpps forwarding rate
IP-MAC-port binding, ACL, port security, DoS defend, storm control, DHCP snooping, 802.1X and RADIUS authentication
6 kV surge protection on service ports and power connector
Lifetime management on Ruijie Cloud anytime, anywhere

PoE Layer 3 Multi-Gigabit SFP Reyee Ruijie

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Overview of Reyee RG-NBS5300-8MG2XS-UP

The Reyee RG-NBS5300-8MG2XS-UP is a 10-port Multi-Gigabit Layer 3 managed switch with 8 x 2.5G RJ45 ports and 2 x 10G SFP+ uplinks. Every RJ45 port supports PoE++ (IEEE 802.3bt/at/af) from a 370 W total budget, making it an ideal companion for Wi-Fi 6 access points and high-power PoE devices whose throughput exceeds a single Gigabit link. With 80 Gbps switching capacity, PoE watchdog and security features including IP-MAC-port binding, ACL, DHCP snooping and 802.1X, it fits offices, hotels, schools, clinics and retail stores. Lifetime Ruijie Cloud management simplifies remote configuration and monitoring.

Technical Specifications – Reyee RG-NBS5300-8MG2XS-UP

Product Information

Product Category	Layer 3
Warranty	5 years

Port Specifications

Total number of RJ45 ports	8
Total number of optical ports	2
Number of 1GE combo ports	No
Number of 1GE SFP ports	No
Number of 10GE SFP+ ports	2
Number of 10/100/1000BASE-T ports	No
Number of 10/100/1000/2500BASE-T ports	8

Power Supply and Consumption

PoE Out standard	PoE/PoE+/PoE++ (IEEE 802.3af/at/bt)
Number of PoE Out ports	8
Number of PoE/PoE+ Out ports	8
Number of PoE/PoE+/PoE++ Out ports	8
PoE budget	370 W
PoE power pins	1–2 (-), 3–6 (+), 4–5 (+), 7–8 (-)

System Specifications

Forwarding rate	59.52 Mpps
Switching capacity	80 Gbps (bit/s)

Environment and Reliability

MTBF	400,000 hours
Operating temperature	0°C to +50°C (32°F to 122°F)
Altitude	Operating altitude: –500 m to +5,000 m; Storage altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
Surge protection	Service port: ±6 kV for common mode; Power connector: ±6 kV for both common mode and differential mode

Basic Configurations

PoE watchdog	Yes

Interface

Jumbo frame length (MTU)	9216 bytes (interface configuration mode)

Security

Port isolation	Yes
Broadcast storm control	Yes

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-NBS5200-24GT4XS-P-V2 Reyee RG-NBS5200-24GT4XS-P-V2 24-Port Gigabit Layer 3 Cloud Managed PoE+ Switch, 370W, 4 SFP+ ⃁ 6,131.26

RG-NBS5200-24SFP/8GT4XS Reyee RG-NBS5200-24SFP/8GT4XS 24-Port SFP Layer 3 Cloud Managed Switch, 8 Gigabit Combo, 4 SFP+ 10G ⃁ 6,071.26

RG-NBS5200-48GT4XS Reyee RG-NBS5200-48GT4XS 48-Port Gigabit Layer 3 Cloud Managed Switch, 4 SFP+ 10G Uplinks ⃁ 5,139.37

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.