[RG-NBS3200-24SFP/8GT4XS] Reyee RG-NBS3200-24SFP/8GT4XS 24-Port SFP L2+ Managed Switch, 8 Combo RJ45, 4x 10G SFP+

Reyee RG-NBS3200-24SFP/8GT4XS 24-Port SFP L2+ Managed Switch, 8 Combo RJ45, 4x 10G SFP+

Part number RG-NBS3200-24SFP/8GT4XS

24 x 1GE SFP ports (including 8 combo ports with 8 Gigabit RJ45) and 4 x 10G SFP+ uplinks
Enterprise-class quality: LACP, IGMP snooping, VLAN, MSTP and ERPS
Layer 2+ features: IPv4/IPv6 static routing and DHCP relay
Multiple security policies: ACL, 802.1X, DHCP snooping, ARP anti-spoofing and IP source guard
IP Camera recognition, unique value for CCTV networks
SON zero-touch provisioning and lifetime management on Ruijie Cloud
5-year warranty

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-NBS3200-24SFP_8GT4XS_Datasheet.pdf Download

Overview of Reyee RG-NBS3200-24SFP/8GT4XS

The Ruijie Reyee RG-NBS3200-24SFP/8GT4XS is a Layer 2+ cloud-managed fiber switch with 24 Gigabit SFP ports, eight of which are combo ports with Gigabit RJ45, plus four 10G SFP+ uplinks. It is ideal as an aggregation switch linking buildings, floors, warehouses and CCTV sites over fiber in enterprises, hotels, factories, schools and retail chains. With 128 Gbps switching capacity, IPv4/IPv6 static routing, DHCP relay, LACP, IGMP snooping, MSTP and ERPS, it delivers enterprise-class performance, while ACL, 802.1X, DHCP snooping and IP source guard protect the network. SON zero-touch provisioning, lifetime Ruijie Cloud management and a 5-year warranty simplify ownership.

Technical Specifications – Reyee RG-NBS3200-24SFP/8GT4XS

Product Information

Product Category	Layer 2+
Warranty	5 years

Port Specifications

Total number of RJ45 ports	8 (including eight combo ports)
Total number of optical ports	28 (including eight combo ports)
Number of 1GE combo ports	8
Number of 1GE SFP ports	24 (including eight combo ports)
Number of 10GE SFP+ ports	4
Number of 10/100/1000BASE-T ports	8 (including eight combo ports)

Power Supply and Consumption

Power input	220 V AC power supply: Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Maximum input current: 2 A
Maximum power consumption	41.8 W
Power supply	Fixed power supply

System Specifications

RAM	512 MB
Flash memory	256 MB
Forwarding rate	95.23 Mpps
Switching capacity	128 Gbps

Dimensions and Weight

Product dimensions (W x D x H)	440 mm x 267.5 mm x 43.6 mm (17.32 in. x 10.53 in. x 1.72 in.)
Weight	3.35 kg (7.39 lbs) (without packaging materials)

Environment and Reliability

Fan	2 x fixed fans
Cooling	Air cooling, left-to-rear airflow
Mounting options	Rack
MTBF	400,000 hours
Operating temperature	0°C to +50°C (32°F to 122°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	10% RH to 90% RH (non-condensing)
Surge protection	Service port: ±6 kV for common mode; Power connector: ±6 kV for both common mode and differential mode

Certification and Regulatory Compliance

Certification	CE, FCC
Safety compliance	IEC 62368-1

Authentication

802.1X authentication	Yes
RADIUS	Yes

Ethernet Switching

Maximum number of VLANs	4094
Maximum number of MAC address entries	16000
Voice VLAN	Yes
MSTP (IEEE 802.1s)	Yes
LACP	Yes

Interface

Jumbo frame length (MTU)	9216 bytes (interface configuration mode)

IP Routing

IPv4 static route	Yes
Maximum number of IPv4 static routes	64
IPv6 static route	Yes
Maximum number of IPv6 static routes	64

IP Service

DHCP relay	Yes

Multicast

Full IGMPv3 snooping	Yes

Network Management and Monitoring

Camera detection	Yes
Ruijie Cloud management	Yes
SNMPv1, v2c, and v3	Yes

Reliability

ERPS	Yes
System dual backup	Yes (Only supported on devices with a factory-installed software version of ReyeeOS 2.320 or later)

Security

Maximum number of ACEs	Number of ACEs in the inbound direction of an interface: 1900; Number of ACEs in the outbound direction of an interface: 0
DHCP snooping	Yes
ARP anti-spoofing	Yes
IP source guard	Yes

System Performance Capacity

Recommended camera limit	200 W H265: 280; 400 W H265: 140

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-NBS3100-24GT4SFP-V2 Reyee RG-NBS3100-24GT4SFP-V2 28-Port Gigabit L2 Cloud Managed Non-PoE Switch, 4 SFP ⃁ 1,041.24

RG-NBS3100-8GT2SFP Reyee RG-NBS3100-8GT2SFP 10-Port Gigabit L2 Cloud Managed Non-PoE Switch, 2 SFP ⃁ 682.61

RG-NBS3200-24GT4XS Reyee RG-NBS3200-24GT4XS 24-Port Gigabit L2+ Cloud Managed Switch, 4x 10G SFP+ ⃁ 2,191.87

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.