Hikvision DS-3E0520HP-E 16-Port Gigabit Unmanaged PoE Switch, 4 Hi-PoE 90 W, 2 SFP

12 × gigabit PoE port, 4 × gigabit Hi-PoE port, 2 × gigabit RJ45 port, and 2 × gigabit fiber optical port.
IEEE 802.3at/af/bt standard for Hi-PoE ports (Max. 90 W PoE output).
IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output).
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard.
6 KV surge protection for PoE ports.
Up to 300 m long-range transmission.
PoE watchdog to auto detect and restart the cameras that do not respond.
Port isolation to improve network security.
Gigabit network access design.
Wire-speed forwarding.
Store-and-forward switching.
Solid high-strength metal shell.

Ask on WhatsApp Quote for quantities

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Documents

Hikvision_DS-3E0520HP-E_Datasheet.pdf

Overview of Hikvision DS-3E0520HP-E

The Hikvision DS-3E0520HP-E is a Gigabit unmanaged PoE switch with 12 Gigabit PoE ports, 4 Gigabit Hi-PoE ports, 2 Gigabit RJ45 uplinks and 2 Gigabit fiber optical ports. Hi-PoE ports follow IEEE 802.3at/af/bt with up to 90 W output, ideal for PTZ cameras and other high-power devices, while standard PoE ports deliver up to 30 W, within a 225 W total PoE budget. Wire-speed, store-and-forward switching, PoE watchdog, port isolation, long-range transmission up to 300 m and 6 KV surge protection come in a solid rack-mount metal housing, suited to compounds, parking areas, warehouses and campuses in Saudi Arabia.

Technical Specifications – Hikvision DS-3E0520HP-E

General

Shell	Metal material
Net Weight	2.79 kg (6.15 lb)
Gross Weight	3.60 kg (7.94 lb)
Dimensions (W × H × D)	440.0 mm × 44.0 mm × 220.8 mm (17.3'' × 1.7'' × 8.7'')
Operating Temperature	0 °C to 45 °C (32 °F to 113 °F)
Storage Temperature	-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity	5% to 95% (no condensation)
Relative Humidity	5% to 95% (no condensation)
Power Supply	100~240 VAC, 50/60 Hz, Max. 4 A
Max. Power Consumption	250 W
Power Consumption In Idle	25 W
Installation Mode	Rack (equipped with mounting ears)
Surge Protection	6 KV

Network Parameters

Ports	16 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
MAC Address Table	8 K
Switching Capacity	40 Gbps
Packet Forwarding Rate	29.76 Mpps
Internal Cache	4.10 Mbits

Dialing Function

Long Range	Ports 13 to 16: up to 300 m Long range performance may vary depend on camera model or cable condition.
Port Isolation	Ports 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog	Ports 1 to 16: auto detect and restart the cameras that do not respond.

PoE Power Supply

PoE Standard	IEEE 802.3af,IEEE 802.3at,IEEE 802.3bt
PoE Power Pin	8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port	Hi-PoE: Ports 1 to 4 PoE: Ports 5 to 16;
Max. Port Power	90 W
PoE Power Budget	225 W

Approval

EMC	FCC (47 CFR Part 15, Subpart B),CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
Safety	UL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemistry	CE-RoHS (2011/65/EU)

Source: Hikvision official website. Specifications are subject to change by the manufacturer.

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.