Overview of Grandstream GS-POE30W-MG
The Grandstream GS-POE30W-MG is a plug-and-play Power over Ethernet injector that supplies power to Grandstream PoE-powered devices, such as GWN series Wi-Fi access points, IP phones and more. It complies with IEEE 802.3 af/at, delivers 30.2W of PoE output at 54VDC and passes data through 2.5Gbps RJ45 LAN IN and LAN OUT ports. A built-in power adapter with a 1.2m AC cable accepts 100~240VAC input, and LEDs show power and PoE load status. It is a simple way to power a single device where no PoE switch port is available, in offices, villas, clinics, hotels and retail stores.
Technical Specifications – Grandstream GS-POE30W-MG
General
| Standards | IEEE 802.3 af/at |
|---|
Ports
| Interface Ports | 1x AC power Jack; 1x 2.5Gbps RJ45 LAN IN; 1x 2.5Gbps RJ45 LAN OUT with PoE |
|---|
Power & PoE
| Input Voltage | 100~240VAC, 50/60Hz |
|---|
| Output Voltage | 54VDC, 1,2 +; 3,6 - |
|---|
| PoE Output Power | 30.2W |
|---|
Physical & Environmental
| LED | Power On: Blue; PoE Load: Purple |
|---|
| Environmental | Operation: 0°C to 45°C; Storage: -10°C to 60°C; Humidity: 10% to 90% non-condensing |
|---|
| Dimension (without Cable) | Unit: 140.55mm x 60.3mm x 35.4mm; Entire Package: 225mm x 130.5mm x 46mm |
|---|
| Weight | Unit: 175g; Entire Package: 400g |
|---|
| Package Content | GS-POE30W-MG, 1.2m AC Cable, Quick Installation Guide, Certification regulatory paper |
|---|
| Compliance | FCC, CE, RCM, IC |
|---|
Source: Grandstream official website and datasheet. Specifications are subject to change by the manufacturer.