Overview of Grandstream GS-POE15W-MG
The Grandstream GS-POE15W-MG is a plug-and-play Power over Ethernet injector that supplies power to Grandstream PoE-powered devices, such as GWN series Wi-Fi access points, IP phones and more. It complies with IEEE 802.3 af, delivers 20W of PoE output at 54VDC and passes data through 2.5Gbps RJ45 LAN IN and LAN OUT ports. A built-in power adapter with a 1.2m AC cable accepts 100~240VAC input, and LEDs show power and PoE load status. It is a simple way to power a single device where no PoE switch port is available, in offices, villas, clinics, hotels and retail stores.
Technical Specifications – Grandstream GS-POE15W-MG
General
Ports
| Interface Ports | 1x AC power Jack; 1x 2.5Gbps RJ45 LAN IN; 1x 2.5Gbps RJ45 LAN OUT with PoE |
|---|
Power & PoE
| Input Voltage | 100~240VAC, 50/60Hz |
|---|
| Output Voltage | 54VDC, 1,2 +; 3,6 - |
|---|
| PoE Output Power | 20W |
|---|
Physical & Environmental
| LED | Power On: Blue; PoE Load: Purple |
|---|
| Environmental | Operation: 0°C to 45°C; Storage: -10°C to 60°C; Humidity: 10% to 90% non-condensing |
|---|
| Dimension (without Cable) | Unit: 140.55mm x 60.3mm x 35.4mm; Entire Package: 225mm x 130.5mm x 46mm |
|---|
| Weight | Unit: 175g; Entire Package: 400g |
|---|
| Package Content | GS-POE15W-MG, 1.2m AC Cable, Quick Installation Guide, Certification regulatory paper |
|---|
| Compliance | FCC, CE, RCM, IC |
|---|
Source: Grandstream official website and datasheet. Specifications are subject to change by the manufacturer.