[G1110PF-8-102W] IP-COM G1110PF-8-102W 10-Port Gigabit PoE Switch, 8 PoE + SFP Uplink, 92W PoE

IP-COM G1110PF-8-102W 10-Port Gigabit PoE Switch, 8 PoE + SFP Uplink, 92W PoE

8 x Gigabit PoE ports (IEEE 802.3af/at)
1 x Gigabit uplink port + 1 x SFP fiber port
Max. PoE output 92W (total power <102W)
20 Gbps switching capacity, 16K MAC table
3 DIP-switch modes: standard, VLAN isolation, 250 m extend
6 kV lightning protection on ports and power

IP-COM

Ask on WhatsApp Quote for quantities

Delivery within 2–5 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Technical Specifications – G1110PF-8-102W

Network standards	Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af/at
LED indicators	1 Link/Act LED per port; 1 Power LED per device; 1 PoE-MAX LED per device
Fixed ports	8 x 10/100/1000Base-T Ethernet ports (Data/Power); 1 x 10/100/1000Base-T Ethernet port (Data); 1 x 100/1000Base-X SFP port
Lightning protection	Port: 6 kV; Power supply: 6 kV
Forwarding mode	Store-and-forward
Switching capacity	20 Gbps
Packet forwarding rate	14.9 Mpps
MAC address table	16K
PoE power supply	Ports 1–8 support IEEE 802.3af/at PoE; 1/2/4/5 positive (+), 3/6/7/8 negative (−)
Input voltage	220V AC 50Hz
Dimensions (L x W x H)	247 x 150 x 37 mm
Port features	Controlled by a hardware DIP switch, three modes: 1. Standard sharing – all ports can communicate, works as a standard PoE switch; 2. VLAN isolation – ports 1–8 are isolated from each other and communicate with port 9 and SFP1, preventing broadcast storms; 3. Extend mode – ports 1–8 drop to 10 Mbps and transmission distance extends up to 250 m, all ports can communicate
Power consumption	Total power consumption: <102W; Max. PoE output power: 92W
Environment	Operating temperature: 0°C to 45°C; Storage temperature: -40°C to 70°C; Operating humidity: 10%–90% RH, non-condensing; Storage humidity: 5%–90% RH, non-condensing
Certifications	CCC, FCC, CE, RoHS

Source: IP-COM official website. Specifications are subject to change by the manufacturer.

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.