[G1110P-8-150W] IP-COM G1110P-8-150W 8-Port Gigabit PoE Unmanaged Switch, 2 SFP Uplinks, 130W PoE

IP-COM G1110P-8-150W 8-Port Gigabit PoE Unmanaged Switch, 2 SFP Uplinks, 130W PoE

8 x Gigabit PoE ports (802.3af/at)
2 x 100/1000M SFP uplink ports
130W max PoE output
20 Gbps switching capacity
3 DIP-switch modes: Standard, Flow Control Off, VLAN
≥6KV port lightning protection

IP-COM

Ask on WhatsApp Quote for quantities

Delivery within 2–5 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Documents

G1110P-8-150W_Datasheet.pdf

Technical Specifications – G1110P-8-150W

Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
LED indicators	1 Link/Ack LED per port; 1 PoE Max LED per device; 1 Power LED per device
Interfaces	8 x 10/100/1000Base-T Ethernet ports (Data/Power); 2 x 100/1000Base-X SFP ports
Port lightning protection	≥6KV
Forwarding mode	Store-and-forward
Switching capacity	20 Gbps
Packet forwarding rate	14.9 Mpps
MAC address table	8K
PoE power supply	Ports 1 to 8 support 802.3af/at standard; 1 2 4 5 +, 3 6 7 8 -
Input voltage	100-240V AC, 50/60Hz
Dimensions (L x W x H)	294 mm x 179.6 mm x 44 mm
Whole switch power consumption	Total power consumption: <150W; Maximum PoE power output: 130W
Port features	Three modes controlled by hardware DIP switch: 1. Standard: flow control is enabled for all ports to avoid network congestion and ensure stable operation. 2. Flow Control Off: flow control is disabled with no limit on data flow, for scenarios with massive upload/download traffic. 3. VLAN: ports 1-6 are isolated from each other but all can communicate with ports 7, 8, SFP1 and SFP2, reducing broadcast storms.
Operating environment	Operating temperature: 0°C to 45°C; Storage temperature: -40°C to 70°C; Operating humidity: 10% to 90%RH, non-condensing; Storage humidity: 5% to 90%RH, non-condensing
Certificates	CCC, FCC, CE, RoHS

Source: IP-COM official website. Specifications are subject to change by the manufacturer.

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.