Skip to Content
  • Delivery in 4–10 working days across Saudi Arabia
  • A tax invoice with every order
  • Technical support before and after you buy
Request a project solution
  1. All products
  2. Networking & Communications
  3. Wi-Fi Networking
  4. Reyee RG-RAP72Pro-OD Wi-Fi 7 BE5040 Indoor/Outdoor Access Point, IP65, 2.5GE, Mesh
  5. Wi-Fi Networking

Reyee RG-RAP72Pro-OD Wi-Fi 7 BE5040 Indoor/Outdoor Access Point, IP65, 2.5GE, Mesh

Part number RG-RAP72Pro-OD
  • AI-powered Wi-Fi 7 versatile outdoor/indoor Mesh AP (up to 5011 Mbps, 5 spatial streams)
  • Wall or pole mounting to fit in any location
  • IP65 weatherproof rating, delivering consistent protection and signal stability
  • Built-in antennas for coverage where needed (up to 300 m at 5 GHz in ideal conditions)
  • 2.5G port + Wi-Fi 7 with MLO and 4K-QAM
  • Tailored for retail businesses with Reyee Mesh, standalone portal, and AI roaming features
PoE Wi-Fi Weatherproof Access Point Mesh Multi-Gigabit Outdoor Wi-Fi 7 Reyee Ruijie
Price
⃁ 1,139.99 ⃁ 1,139.99 ⃁ 1,484.36 Save 23%
⃁ 1,139.99 ⃁ 1,484.36
(Tax excluded)
Ask on WhatsApp Quote for installers and contractors
  • Delivery within 4–10 business days across Saudi Arabia
  • Warranty according to the manufacturer
  • Tax invoice with every order
  • Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-RAP72Pro-OD_Datasheet.pdf Download

Overview of Reyee RG-RAP72Pro-OD

The Reyee RG-RAP72Pro-OD is an AI-powered BE5040 Wi-Fi 7 access point designed for both indoor and outdoor use, such as open dining areas, corridors, backyards, pools and spas. With five spatial streams (2 x 2 on 2.4 GHz and 3 x 3 on 5 GHz) it reaches up to 5011 Mbps, and MLO lowers latency and packet loss under interference. Its slim IP65 enclosure mounts on a wall or pole, operates from -30°C to +65°C and offers ±4 kV surge protection. A 2.5GE port with 802.3af/at PoE, Reyee Mesh, a standalone portal and AI roaming make it a practical choice for cafes, restaurants, hotels, villas and retail outlets.

Technical Specifications – Reyee RG-RAP72Pro-OD

Product Information

Product typeOutdoor

Hardware Specifications

5 GHz Wi-FiWi-Fi 4 (IEEE 802.11a/n), Wi-Fi 5 (IEEE 802.11ac), Wi-Fi 6 (IEEE 802.11ax), Wi-Fi 7 (IEEE 802.11be)
2.4 GHz Wi-FiWi-Fi 4 (IEEE 802.11b/g/n), Wi-Fi 6 (IEEE 802.11ax), Wi-Fi 7 (IEEE 802.11be)
Operating bandIEEE 802.11b/g/n/ax/be: 2.400 GHz to 2.4835 GHz; IEEE 802.11a/n/ac/ax/be: 5.150 GHz to 5.350 GHz, 5.470 GHz to 5.725 GHz, 5.725 GHz to 5.850 GHz (available bands vary with countries and regions)
Radio designDual-radio, 5 spatial streams (2.4 GHz: 2 x 2 MU-MIMO; 5 GHz: 3 x 3 MU-MIMO)
FEM2.4 GHz: 2 x eFEM; 5 GHz: 3 x eFEM
5 GHz channel widthAuto/20/40/80/160 MHz
2.4 GHz channel widthAuto/20/40 MHz
Maximum wireless data rate5011 Mbps
5 GHz wireless data rate4323 Mbps
2.4 GHz wireless data rate688 Mbps
Maximum transmit power (5 GHz)Combined power: 27.7 dBm (single-stream power: 23 dBm); varies according to regulations in different countries and regions
Maximum transmit power (2.4 GHz)Combined power: 26 dBm (single-stream power: 23 dBm); varies according to regulations in different countries and regions
Coverage range5 GHz max: 300 m (984.25 ft.); 2.4 GHz max: 100 m (328.08 ft.); 5 GHz recommended: 150 m (492.13 ft.); 2.4 GHz recommended: 50 m (164.04 ft.) (ideal environment without obstruction)
ModulationOFDM: BPSK, QPSK, 16-QAM, 64-QAM; DSSS: DBPSK, DQPSK, CCK; MIMO-OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM and 4096-QAM; OFDMA
Receive sensitivity (11be)20 MHz: –85 dBm (MCS0), –52 dBm (MCS13); 160 MHz: –79 dBm (MCS0), –44 dBm (MCS13)
Antenna5 GHz: 1 built-in omnidirectional antenna; integrated 2.4 GHz and 5 GHz: 2 built-in omnidirectional antennas
Antenna gain5 GHz: 6.28 dBi; 2.4 GHz: 3.62 dBi
Product dimensions (W x D x H)90 mm x 46 mm x 239 mm (3.54 in. x 1.81 in. x 9.41 in.) (excluding the mounting bracket)
ColorWhite
Weight≤ 0.7 kg (1.54 lbs.) (without packaging materials)
Number of 10/100/1000/2500BASE-T ports1
Reset button / LEDs1 / 1 x system status LED
Power supplyPoE/PoE+ (no local power supply)
PoE In standardIEEE 802.3af (PoE) (radio limited to 1T1R at 2.4 GHz and 2T2R at 5 GHz); IEEE 802.3at (PoE+)
Maximum power consumption21 W
Operating temperature–30°C to +65°C (–22°F to +149°F)
Storage temperature–40°C to +85°C (–40°F to +185°F)
Operating humidity0% RH to 100% RH (non-condensing)
Mounting optionsWall/Pole
IP ratingIP65
Surge protectionEthernet port: ±4 kV for common mode
MTBF400,000 hours
CertificationCE, FCC, CB, ISED, cTUVus; RoHS
Flash memory / RAM256 MB / 512 MB DDR3

Software Specifications

Operating modesAP mode, routing mode, wireless repeater mode
Internet access modeStatic IP address, static IPv6 address, dynamic IP address, dynamic IPv6 address, PPPoE
Maximum number of associated wireless clients64 (2.4 GHz), 511 (5 GHz), 511 (2.4 GHz and 5 GHz enabled)
Recommended number of associated wireless clients (802.11ax, 160 MHz)16 (2.4 GHz), 94 (5 GHz), 110 (both enabled)
Maximum number of SSIDs8
Wi-Fi 7 featuresMLO (enable/disable), 4K-QAM
WLAN featuresOFDMA, WMM, DFS, beamforming, AP load balancing, Layer 2 isolation, radio-based client limiting
Roaming802.11k/v, fast transition (802.11r), Layer 2 roaming, Layer 3 roaming, AI roaming, co-channel roaming
SecurityPSK authentication, WPA-PSK/WPA2-PSK/WPA3-SAE, 802.1X authentication, MAC blocklists/allowlists (256)
MeshAP Mesh, mesh management
AP portal authenticationYes
Maximum number of devices that can be managed300
IP servicesPPPoE client, ARP binding, static/dynamic NAT, DHCP server, IPv6, IEEE 802.1Q VLAN
ManagementRuijie Reyee App, eWeb, Ruijie Cloud, SNMP; network-wide configuration and management
Default web loginSingle-device: 10.44.77.254; network-wide: 10.44.77.253; default password: admin

Package Contents

Package contents1 x AP, 1 x mounting bracket, 1 x metal hose clamp, 2 x cross pan head screws (ST3.5 x 25 mm), 2 x plastic expansion anchors (φ6 x 25 mm), 1 x user manual, 1 x warranty card
Power adapterNot included

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.
Request a quote

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.

Explore this topic