[RG-RAP72-Wall] Reyee RG-RAP72-Wall Wi-Fi 7 BE3600 Wall-Plate AP, 2.5G Uplink, 4 x GE LAN, PoE Out

Reyee RG-RAP72-Wall Wi-Fi 7 BE3600 Wall-Plate Access Point, 2.5G Uplink, 4 x GE LAN, PoE Out

Part number RG-RAP72-Wall

Wi-Fi 7 revolution, providing data rates of up to 3600 Mbps (2882 Mbps at 5 GHz + 688 Mbps at 2.4 GHz)
2.5 Gbps uplink port for ultra-high-speed indoor access
4 x 10/100/1000BASE-T LAN ports for wired devices
PoE output for IP phones and other IoT devices (1 port, 10 W with an 802.3at power source)
Wi-Fi 7 Multi-Link Operation (MLO), 4K-QAM and MRU
Compact design with a thickness of 24 mm
Anti-theft lock for device protection
Manage the whole network through Ruijie Cloud

PoE Wi-Fi Access Point Cloud Managed Multi-Gigabit Wi-Fi 7 Reyee Ruijie

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-RAP72-Wall_Datasheet.pdf Download

Overview of Reyee RG-RAP72-Wall

The Reyee RG-RAP72-Wall is a BE3600 dual-band Wi-Fi 7 wall-plate access point for star hotels, education and offices. It delivers up to 3570 Mbps (2882 Mbps on 5 GHz plus 688 Mbps on 2.4 GHz) with Multi-Link Operation, 4K-QAM and MRU for low-latency streaming and AR/VR. A 2.5 Gbps uplink removes bottlenecks, while four Gigabit LAN ports and one PoE Out port connect and power IP phones, IPTV boxes and IoT devices in each room. Only 24 mm thick with an anti-theft lock, it mounts on a junction box, runs on 802.3af/at PoE and is managed through Ruijie Cloud, the Reyee App or eWeb.

Technical Specifications – Reyee RG-RAP72-Wall

Product Information

Product type	Wall AP

Hardware Specifications

Product dimensions (W x D x H)	86 mm x 24 mm x 124 mm (3.39 in. x 0.94 in. x 4.88 in.) (excluding the mounting bracket)
Color	White
Weight	≤ 0.27 kg (0.60 lbs.) (without packaging materials)
5 GHz Wi-Fi	Wi-Fi 4 (IEEE 802.11a/n), Wi-Fi 5 (IEEE 802.11ac), Wi-Fi 6 (IEEE 802.11ax), Wi-Fi 7 (IEEE 802.11be)
2.4 GHz Wi-Fi	Wi-Fi 4 (IEEE 802.11b/g/n), Wi-Fi 6 (IEEE 802.11ax), Wi-Fi 7 (IEEE 802.11be)
Operating band	IEEE 802.11b/g/n/ax/be: 2.400 GHz to 2.4835 GHz; IEEE 802.11a/n/ac/ax/be: 5.150 GHz to 5.350 GHz, 5.470 GHz to 5.725 GHz, 5.725 GHz to 5.850 GHz (available bands vary with countries and regions)
Radio design	Dual-radio, 4 spatial streams (2.4 GHz: 2 x 2 MU-MIMO; 5 GHz: 2 x 2 MU-MIMO)
FEM	iFEM
5 GHz channel width	Auto/20/40/80/160 MHz
2.4 GHz channel width	Auto/20/40 MHz
Maximum wireless data rate	3570 Mbps
5 GHz wireless data rate	2882 Mbps
2.4 GHz wireless data rate	688 Mbps
Maximum transmit power (5 GHz)	Combined power: 21.7 dBm (single-stream power: 17 dBm); varies according to regulations in different countries and regions
Maximum transmit power (2.4 GHz)	Combined power: 20 dBm (single-stream power: 17 dBm); varies according to regulations in different countries and regions
Coverage range	55 m² (592.02 sq ft) (ideal environment without obstruction)
Modulation	OFDM: BPSK, QPSK, 16-QAM, 64-QAM; DSSS: DBPSK, DQPSK, CCK; MIMO-OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM and 4096-QAM; OFDMA
Receive sensitivity (11be)	20 MHz: –85 dBm (MCS0), –52 dBm (MCS13); 160 MHz: –79 dBm (MCS0), –44 dBm (MCS13)
Antenna	5 GHz: 1 built-in omnidirectional antenna; integrated 2.4 GHz and 5 GHz: 2 built-in omnidirectional antennas
Antenna gain	5 GHz: 4.56 dBi; 2.4 GHz: 2.84 dBi
Number of 10/100/1000BASE-T ports	4
Number of 10/100/1000/2500BASE-T ports	1
Reset button / LEDs	1 / 1 x system status LED
Power supply	PoE/PoE+ (no local power supply)
PoE In standard	IEEE 802.3af (PoE), IEEE 802.3at (PoE+); 802.3af does not support PoE Out
Number of PoE Out ports	1
PoE budget	10 W (when power source is IEEE 802.3at-compliant)
Maximum power consumption	15 W (excluding PoE output)
Flash memory / RAM	256 MB / 512 MB DDR3
Operating temperature	0°C to +40°C (32°F to +104°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	5% RH to 95% RH (non-condensing)
Mounting options	Junction box
IP rating	IP41
Surge protection	Ethernet port: ±2 kV for common mode
MTBF	400,000 hours
Certification	CE, FCC, CB, ISED, cTUVus; RoHS

Software Specifications

Multicast	IGMP snooping (wireless-to-wireless, wired-to-wireless)
Maximum number of associated wireless clients	64 (2.4 GHz), 511 (5 GHz), 511 (2.4 GHz and 5 GHz enabled)
Recommended number of associated wireless clients (802.11ax/be, 160 MHz)	16 (2.4 GHz), 94 (5 GHz), 110 (both enabled)
Maximum number of SSIDs	8
Wi-Fi 7 features	MLO (enable/disable), 4K-QAM
WLAN features	OFDMA, WMM, DFS, beamforming, AP load balancing, Layer 2 isolation, radio-based client limiting
Roaming	802.11k/v, fast transition (802.11r), Layer 2 roaming, Layer 3 roaming, AI roaming, co-channel roaming
Security	PSK authentication, WPA-PSK/WPA2-PSK/WPA3-SAE, 802.1X authentication, dynamic VLAN assignment, MAC blocklists/allowlists (256)
Mesh	AP Mesh, mesh management
AP portal authentication	Yes
Maximum number of devices that can be managed	300
Management	Ruijie Reyee App, eWeb, Ruijie Cloud, SNMP; network-wide configuration and management; wireless repeater mode
Ethernet switching	IEEE 802.1Q VLAN; interface rate WAN: 10/100/1000/2500 Mbps, LAN1–LAN4: 10/100/1000 Mbps auto-negotiation
IP services	PPPoE client, ARP binding, static/dynamic NAT, DHCP server, IPv6, IPTV transparent transmission
Operating modes	AP mode, routing mode
Internet access mode	Static IP address, static IPv6 address, dynamic IP address, dynamic IPv6 address, PPPoE
Default web login	Single-device: 10.44.77.254; network-wide: 10.44.77.253; default password: admin

Package Contents

Package contents	1 x AP, 1 x mounting bracket, 4 x cross pan head screws (M4 x 25 mm), 1 x user manual, 1 x warranty card, 1 x key to security lock
Power adapter	Not included

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-RAP1200(P) Reyee RG-RAP1200(P) Wi-Fi 5 1267Mbps Wall-Mount Access Point, 5 Gigabit Ports, PoE Passthrough ⃁ 386.35

RG-RAP1201 Reyee RG-RAP1201 Wi-Fi 5 1267Mbps Wall-Mount Access Point, 2 Gigabit Ports, PoE ⃁ 315.31

RG-RAP62-Wall Reyee RG-RAP62-Wall Wi-Fi 6 AX3000 Wall-Plate Access Point, 4 x 1GE LAN, PoE Out ⃁ 840.28

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.