[RG-RAP6260(H)-D] Reyee RG-RAP6260(H)-D Wi-Fi 6 AX6000 Outdoor Directional AP, IP68, 2.5GE + SFP

Reyee RG-RAP6260(H)-D Wi-Fi 6 AX6000 Outdoor Directional Access Point, IP68, 2.5GE + SFP

Part number RG-RAP6260(H)-D

Ultra-fast 5.95 Gbit/s outdoor Wi-Fi 6, best-in-class Wi-Fi performance (OFDMA, 1024-QAM, 160 MHz, dual-band 4x4 MU-MIMO)
Directional coverage with long range: 8 built-in directional antennas (9 dBi at 5 GHz, 10 dBi at 2.4 GHz)
Easily adding extra outdoor Wi-Fi with Reyee Mesh
Long-distance deployment with the optical port (1 x 1GE SFP)
Internet access with 2.5 Gbit/s uplink
IP68 rating, adapting to harsh environments, with ±4 kV surge protection
AP and routing modes, 802.11k/v/r, Layer 2/Layer 3 and AI roaming
Free cloud management via Ruijie Cloud, Ruijie Reyee App and eWeb

Wi-Fi Weatherproof Access Point Multi-Gigabit Outdoor SFP Wi-Fi 6 Reyee Ruijie

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-RAP6260_H_-D_Datasheet.pdf Download

Overview of Reyee RG-RAP6260(H)-D

The Reyee RG-RAP6260(H)-D is a high-density Wi-Fi 6 AX6000 outdoor access point with built-in directional antennas for long-range, focused coverage. With OFDMA, 1024-QAM, 160 MHz channels and dual-band 4x4 MU-MIMO it reaches 5.95 Gbit/s and supports up to 512 clients, with a maximum range of 700 m on 5 GHz in ideal conditions. A 2.5GE uplink and a 1GE SFP port enable fast and long-distance backhaul, while the IP68 sealed enclosure, ±4 kV surge protection and -40°C to +65°C operating range handle harsh climates. Powered by 802.3at/bt PoE or 48 V DC, it fits stadiums, plazas, beaches, parking lots, warehouse yards and campuses.

Technical Specifications – Reyee RG-RAP6260(H)-D

Product Information

Product type	Outdoor AP

Hardware Specifications

Antenna	2.4 GHz: 4 built-in directional antennas; 5 GHz: 4 built-in directional antennas
Antenna horizontal orientation	2.4 GHz: 50°; 5 GHz: 60°
Antenna vertical orientation	2.4 GHz: 30°; 5 GHz: 30°
Antenna gain	5 GHz: 9.00 dBi; 2.4 GHz: 10.00 dBi
5 GHz Wi-Fi	Wi-Fi 4 (IEEE 802.11a/n), Wi-Fi 5 (IEEE 802.11ac), Wi-Fi 6 (IEEE 802.11ax)
2.4 GHz Wi-Fi	Wi-Fi 4 (IEEE 802.11b/g/n), Wi-Fi 6 (IEEE 802.11ax)
Operating band	IEEE 802.11b/g/n/ax: 2.400 GHz to 2.4835 GHz; IEEE 802.11a/n/ac/ax: 5.150 GHz to 5.350 GHz, 5.470 GHz to 5.725 GHz, 5.725 GHz to 5.850 GHz (available bands vary with countries and regions)
Radio design	Dual-radio, 8 spatial streams (2.4 GHz: 4 x 4 MU-MIMO; 5 GHz: 4 x 4 MU-MIMO)
FEM	2.4 GHz: 4 x eFEM; 5 GHz: 4 x eFEM
5 GHz channel width	Auto/20/40/80/160 MHz
2.4 GHz channel width	Auto/20/40 MHz
Maximum wireless data rate	5950 Mbps
5 GHz wireless data rate	4803 Mbps
2.4 GHz wireless data rate	1147 Mbps
Maximum transmit power (5 GHz / 2.4 GHz)	Combined power: 32 dBm (single-stream power: 26 dBm); varies according to regulations in different countries and regions
Coverage range	5 GHz max: 700 m (2296.59 ft.); 2.4 GHz max: 300 m (984.25 ft.); 5 GHz recommended: 350 m (1148.29 ft.); 2.4 GHz recommended: 75 m (246.06 ft.) (ideal environment without obstruction)
Modulation	OFDM: BPSK, QPSK, 16-QAM, 64-QAM; DSSS: DBPSK, DQPSK, CCK; MIMO-OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM; OFDMA
Receive sensitivity (11ax)	20 MHz: –85 dBm (MCS0), –58 dBm (MCS11); 160 MHz: –76 dBm (MCS0), –49 dBm (MCS11)
Product dimensions (W x D x H)	300 mm x 300 mm x 75.5 mm (11.81 in. x 11.81 in. x 2.97 in.) (excluding the mounting bracket)
Color	White
Weight	≤ 3.5 kg (7.72 lbs.) (without packaging materials)
Number of 10/100/1000/2500BASE-T ports	1
Number of 1GE SFP ports	1
Reset button / LEDs	1 / 1 x system status LED
Power supply	DC power adapter; PoE+/PoE++ (DC power adapter is preferred if both are available)
Local power supply	Yes, one DC power connector (48 V, 1 A)
Dimensions of the DC connector	Outer diameter: 5.5 mm; inner diameter: 2.1 mm; depth: 10 mm
PoE In standard	IEEE 802.3at (PoE+) (radio limited to 2T2R at 2.4 GHz and 5 GHz); IEEE 802.3bt (PoE++)
Maximum power consumption	40 W
Operating temperature	–40°C to +65°C (–40°F to +149°F)
Storage temperature	–40°C to +85°C (–40°F to +185°F)
Operating humidity	0% RH to 100% RH (non-condensing)
Mounting options	Wall/Pole
IP rating	IP68
Surge protection	Ethernet port: ±4 kV for common mode
MTBF	400,000 hours
Certification	CE, FCC, CB, ISED, cTUVus; RoHS
Flash memory / RAM	256 MB / 512 MB DDR3

Software Specifications

Maximum number of associated wireless clients	64 (2.4 GHz), 512 (5 GHz), 512 (2.4 GHz and 5 GHz enabled)
Recommended number of associated wireless clients (802.11ax, 160 MHz)	16 (2.4 GHz), 114 (5 GHz), 130 (both enabled)
Maximum number of SSIDs	8
WLAN features	OFDMA, WMM, DFS, beamforming, AP load balancing, Layer 2 isolation, radio-based client limiting
Roaming	802.11k/v, fast transition (802.11r), Layer 2 roaming, Layer 3 roaming, AI roaming, co-channel roaming
Security	PSK authentication, WPA-PSK/WPA2-PSK/WPA3-SAE, 802.1X authentication, dynamic VLAN assignment, MAC blocklists/allowlists (256)
Mesh	AP Mesh, mesh management
AP portal authentication	Yes
Maximum number of devices that can be managed	300
Operating modes	AP mode, routing mode, wireless repeater mode
Internet access mode	Static IP address, static IPv6 address, dynamic IP address, dynamic IPv6 address, PPPoE
IP services	ARP binding, static/dynamic NAT, DHCP server, IPv6, IPTV transparent transmission
Management	Ruijie Reyee App, eWeb, Ruijie Cloud, SNMP; network-wide configuration and management
Multicast	IGMP snooping (wireless-to-wireless, wired-to-wireless)
Ethernet switching	IEEE 802.1Q VLAN; interface rate ETH: 10/100/1000/2500 Mbps auto-negotiation
Default web login	Single-device: 10.44.77.254; network-wide: 10.44.77.253; default password: admin

Package Contents

Package contents	1 x AP, 2 x hose clamps, 1 x mounting bracket, 1 x mounting arm, 4 x hex machine screws (M8 x 20 mm), 4 x expansion anchors (M8 x 60 mm), 1 x cable gland for SFP port, 1 x cable gland for Ethernet port (pre-installed), 1 x SFP port plug (pre-installed), 1 x DC connector plug (pre-installed), 1 x cable gland for DC connector, 1 x grounding cable, 1 x user manual, 1 x warranty card
Power adapter	Not included

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-RAP6260(G) Reyee RG-RAP6260(G) Wi-Fi 6 AX1800 Outdoor Omni Access Point, IP68, 1 x GE + 1 x SFP, PoE+ ⃁ 1,503.82

RG-RAP6260(H) Reyee RG-RAP6260(H) Wi-Fi 6 AX6000 High-Density Outdoor Omni Access Point, IP68, 2.5GE + SFP ⃁ 3,885.00

RG-RAP6262 Reyee RG-RAP6262 Wi-Fi 6 AX3000 Outdoor Omni Access Point, IP68, 1 x GE + 1 x SFP, 160 MHz ⃁ 2,437.50

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.