Skip to Content
  • Delivery in 4–10 working days across Saudi Arabia
  • A tax invoice with every order
  • Technical support before and after you buy
Request a project solution
  1. All products
  2. Networking & Communications
  3. Wi-Fi Networking
  4. Reyee RG-RAP62-Wall-Lite Wi-Fi 6 AX3000 Wall-Plate Access Point, 2 x 1GE Ports, PoE Powered
  5. Wi-Fi Networking

Reyee RG-RAP62-Wall-Lite Wi-Fi 6 AX3000 Wall-Plate Access Point, 2 x 1GE Ports, PoE Powered

Part number RG-RAP62-Wall-Lite
  • Wi-Fi 6 AX3000 speeds: maximum 2401 Mbps in 5 GHz + maximum 573 Mbps in 2.4 GHz
  • Compatible with 86-mm and EU standard junction boxes
  • Blending into the indoor environment
  • Thickness-segmented design, with only 24.8 mm (0.98 in.) exposed on the wall
  • AP and routing modes with 802.11k/v/r, Layer 2/Layer 3 and AI roaming
  • Centralized management on Ruijie Cloud, Ruijie Reyee App and eWeb
PoE Gigabit Wi-Fi Access Point Cloud Managed Wi-Fi 6 Reyee Ruijie
Price
⃁ 774.43 ⃁ 774.43 ⃁ 1,008.38 Save 23%
⃁ 774.43 ⃁ 1,008.38
(Tax excluded)
Ask on WhatsApp Quote for installers and contractors
  • Delivery within 4–10 business days across Saudi Arabia
  • Warranty according to the manufacturer
  • Tax invoice with every order
  • Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-RAP62-Wall-Lite_Datasheet.pdf Download

Overview of Reyee RG-RAP62-Wall-Lite

The Reyee RG-RAP62-Wall-Lite is a Wi-Fi 6 AX3000 dual-band wall-plate access point with a refined design that blends into indoor spaces. It delivers up to 2974 Mbps (2401 Mbps on 5 GHz plus 573 Mbps on 2.4 GHz) with 160 MHz channel support, and its thickness-segmented body leaves only 24.8 mm exposed on the wall. It fits 86-mm and EU junction boxes, offers two Gigabit Ethernet ports and is powered by 802.3af/at PoE. Supporting AP and routing modes, seamless roaming and centralized management through Ruijie Cloud, the Ruijie Reyee App or eWeb, it suits hotel rooms, offices, clinics and apartments.

Technical Specifications – Reyee RG-RAP62-Wall-Lite

Product Information

Product typeWall AP

Hardware Specifications

5 GHz Wi-FiWi-Fi 4 (IEEE 802.11a/n), Wi-Fi 5 (IEEE 802.11ac), Wi-Fi 6 (IEEE 802.11ax)
2.4 GHz Wi-FiWi-Fi 4 (IEEE 802.11b/g/n), Wi-Fi 6 (IEEE 802.11ax)
Operating bandIEEE 802.11b/g/n/ax: 2.400 GHz to 2.4835 GHz; IEEE 802.11a/n/ac/ax: 5.150 GHz to 5.350 GHz, 5.470 GHz to 5.725 GHz, 5.725 GHz to 5.850 GHz (available bands vary with countries and regions)
Radio designDual-radio, 4 spatial streams (2.4 GHz: 2 x 2 MU-MIMO; 5 GHz: 2 x 2 MU-MIMO)
FEMiFEM
5 GHz channel widthAuto/20/40/80/160 MHz
2.4 GHz channel widthAuto/20/40 MHz
Maximum wireless data rate2974 Mbps
5 GHz wireless data rate2401 Mbps
2.4 GHz wireless data rate573 Mbps
Maximum transmit power (5 GHz)Combined power: 21 dBm (single-stream power: 18 dBm); varies according to regulations in different countries and regions
Maximum transmit power (2.4 GHz)Combined power: 21 dBm (single-stream power: 18 dBm); varies according to regulations in different countries and regions
Coverage range45 m² (484.38 sq ft) (ideal environment without obstruction)
ModulationOFDM: BPSK, QPSK, 16-QAM, 64-QAM; DSSS: DBPSK, DQPSK, CCK; MIMO-OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM; OFDMA
Receive sensitivity (11ax)20 MHz: –85 dBm (MCS0), –58 dBm (MCS11); 160 MHz: –76 dBm (MCS0), –49 dBm (MCS11)
Antenna5 GHz: 1 built-in omnidirectional antenna; integrated 2.4 GHz and 5 GHz: 2 built-in omnidirectional antennas
Antenna gain5 GHz: 4.42 dBi; 2.4 GHz: 3.07 dBi
Number of 10/100/1000BASE-T ports2
Reset button1
LEDs1 x system status LED
Power supplyPoE/PoE+ (no local power supply)
PoE In standardIEEE 802.3af (PoE), IEEE 802.3at (PoE+)
Maximum power consumption11.2 W
Product dimensions (W x D x H)86 mm x 38 mm x 86 mm (3.39 in. x 1.50 in. x 3.39 in.)
ColorWhite
Weight≤ 0.25 kg (0.55 lbs.) (without packaging materials)
Flash memory / RAM128 MB / 512 MB DDR3
CertificationCE, CB; RoHS
Operating temperature0°C to 40°C (32°F to 104°F)
Storage temperature–40°C to +70°C (–40°F to +158°F)
Operating humidity5% RH to 95% RH (non-condensing)
Mounting optionsJunction box
Surge protectionEthernet port: ±2 kV for common mode
MTBF400,000 hours

Software Specifications

ManagementRuijie Reyee App, eWeb, Ruijie Cloud, SNMP; network-wide configuration and management
Wireless repeater modeYes
Maximum number of associated wireless clients64 (2.4 GHz), 256 (5 GHz), 256 (2.4 GHz and 5 GHz enabled)
Recommended number of associated wireless clients (802.11ax, 160 MHz)16 (2.4 GHz), 94 (5 GHz), 110 (both enabled)
Maximum number of SSIDs8
WLAN featuresOFDMA, WMM, DFS, beamforming, AP load balancing, Layer 2 isolation, radio-based client limiting
Roaming802.11k/v, fast transition (802.11r), Layer 2 roaming, Layer 3 roaming, AI roaming, co-channel roaming
SecurityPSK authentication, WPA-PSK/WPA2-PSK/WPA3-SAE, 802.1X authentication, dynamic VLAN assignment, MAC blocklists/allowlists (256)
MeshAP Mesh, mesh management
AP portal authenticationYes
Maximum number of devices that can be managed300
Operating modesAP mode, routing mode
Internet access modeStatic IP address, static IPv6 address, dynamic IP address, dynamic IPv6 address, PPPoE
IP servicesARP binding, static/dynamic NAT, DHCP server, IPv6, IPTV transparent transmission
MulticastIGMP snooping (wireless-to-wireless, wired-to-wireless)
Ethernet switchingIEEE 802.1Q VLAN, interface rate 10/100/1000 Mbps auto-negotiation
Default web loginSingle-device: 10.44.77.254; network-wide: 10.44.77.253; default password: admin

Package Contents

Package contents1 x AP, 2 x M4 x 40 mm machine screws, 2 x M3.5 x 30 mm machine screws, 2 x ST3 x 30 mm tapping screws, 1 x user manual, 1 x warranty card
Power adapterNot included

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.
Request a quote

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.

Explore this topic