[RG-M32] Reyee RG-M32 3200M Wi-Fi 6 Dual-Band Gigabit Mesh Router, 4x4 MIMO

Reyee RG-M32 3200M Wi-Fi 6 Dual-Band Gigabit Mesh Router, 4x4 MIMO

Part number RG-M32

Next-gen gigabit Wi-Fi 6 standard: 800 Mbps (2.4 GHz) + 2402 Mbps (5 GHz)
4x4 enterprise-level chipset, better stability under heavy load
4 dual-band antennas and 8 signal amplifiers provide whole-home network coverage
Exclusive Reyee Mesh solution: one click to mesh up multiple Reyee Mesh devices
Smart signal indicator to find the best spot to place a sub-router
Take control of your home network at your fingertips with Ruijie Cloud
1 x gigabit WAN port and 3 x gigabit LAN ports
OpenVPN and PPTP VPN server/client, IPv6, guest Wi-Fi and WPA3

Gigabit Wi-Fi Cloud Managed Mesh Router Wi-Fi 6 Reyee Ruijie

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-M32_Datasheet.pdf Download

Overview of Reyee RG-M32

The Ruijie Reyee RG-M32 is a 3200M dual-band gigabit Wi-Fi 6 mesh router for villas, large apartments, small offices and shops that need strong whole-home coverage. A 4x4 enterprise-level chipset keeps performance stable under heavy load, delivering up to 800 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz. Four dual-band antennas and eight signal amplifiers spread the signal throughout the space. With exclusive Reyee Mesh, multiple Reyee Mesh devices join with one click, and a smart signal indicator helps place each sub-router. One gigabit WAN and three gigabit LAN ports, Ruijie Cloud management, VPN and WPA3 are included.

Technical Specifications – Reyee RG-M32

Wi-Fi Radio

Wi-Fi standard	Wi-Fi 6 (IEEE 802.11ax)
Max. Wi-Fi Speed	2.4 GHz, 800 Mbps; 5 GHz, 2402 Mbps
Operating band	IEEE 802.11b/g/n, 2.400GHz~2.4835GHz; IEEE 802.11a/n/ac/ax, 5.150GHz~5.350GHz; IEEE 802.11a/n/ac/ax, 5.470GHz~5.725GHz; IEEE 802.11a/n/ac/ax, 5.725GHz~5.850GHz
MIMO	2.4 GHz, 4 x 4; 5 GHz, 4 x 4
Highest QAM order	1024
2.4 GHz channel width	Auto/20/40 MHz
5 GHz channel width	Auto/20/40/80 MHz
FEM	EPA

Antenna

Antenna	4 x internal omnidirectional antennas
Antenna gain (2.4 GHz)	2.5 dBi
Antenna gain (5 GHz)	3 dBi

Port Specifications

WAN ports	1 x 10/100/1000BASE-T port
LAN ports	3 x 10/100/1000BASE-T ports
LEDs	1 x system status LED; 4 x Ethernet port LEDs

System Specifications

RAM	256 MB

Power Supply and Consumption

Power supply	DC 12 V 2.5 A

Certification and Regulatory Compliance

Certification	CE

Environment and Reliability

Operating temperature	-10 °C to +45 °C (14 °F to 113 °F)
Operating humidity	5% RH to 95% RH (non-condensing)
Storage temperature	-40 °C to +70 °C (-40 °F to 158 °F)

Dimensions and Weight

Product dimensions (W x D x H)	119 mm × 119 mm × 200 mm (4.69 in. × 4.69 in. × 7.87 in.)
Weight	0.66 kg (1.46 lbs) (without packaging materials); 1.05 kg (2.31 lbs) (with packaging materials)

Product Information

Warranty	3 years

Basic Configurations

Internet access mode	PPPoE, DHCP, Static IP, WISP
AP mode	Yes

Network Management and Monitoring

WISP mode	Yes
Ruijie Cloud management	Yes
Arabic	Yes

Ethernet Switching

WAN port aggregation	No
LAN port aggregation	No

Ethernet Interface

VLAN-based IPTV	Yes

IP Service

IPv6	Yes
DDNS	Yes

Reyee Mesh 3.0

Reyee Mesh 3.0	Yes
Maximum number of clients	192

VPN

OpenVPN server	Yes
Number of concurrent tunnels supported by the OpenVPN server	8
OpenVPN bandwidth	13 Mbps
PPTP VPN server	Yes

Behavior Management

Parental control	Yes

Wireless Configuration

Guest Wi-Fi	Yes

Security

Encryption mode	WPA-PSK, WPA2-PSK, WPA/WPA2-PSK, WPA3-SAE, WPA2-PSK/WPA3-SAE

WLAN

OFDMA	Yes (DL OFDMA)
802.11k/v roaming	Yes
Beamforming	Yes

System Performance Capacity

Recommended number of concurrent clients	12 (2.4 GHz); 48 (5 GHz)
Recommended camera limit	6 (2.4 GHz); 16 (5 GHz)

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-EG105G-P-V3 Reyee RG-EG105G-P-V3 Cloud Managed PoE Router, 5 Gigabit Ports, 4 PoE+, 54W, 100 Users ⃁ 669.29

RG-EG105GW(T) Reyee RG-EG105GW(T) Wi-Fi 5 All-in-One Business Router, 1267 Mbps, 5 Gigabit Ports, Mesh ⃁ 641.94

RG-EG209GS Reyee RG-EG209GS Cloud Managed Router, 8 Gigabit Ports + 1 SFP, 200 Users, 4 WAN ⃁ 641.94

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.