[RG-ES207GS-AC-OD] Reyee RG-ES207GS-AC-OD 7-Port Gigabit Outdoor PoE Switch, AC Input, 4 PoE+, 2 SFP, IP65

Reyee RG-ES207GS-AC-OD 7-Port Gigabit Outdoor PoE Switch, AC Input, 4 PoE+, 2 SFP, IP65

Part number RG-ES207GS-AC-OD

4 x Gigabit PoE+ ports (IEEE 802.3af/at) with 60 W PoE budget, 1 x Gigabit RJ45 and 2 x 1GE SFP uplinks; 100-240 V AC input
2 x SFP ports for ERPS ring redundancy
All-in-one outdoor switch, 4-in-1 integration
High-level weatherproofing: IP65 rating, ±8 kV PoE surge protection
Camera troubleshooting with camera detection, cable test and PoE watchdog
Uninterrupted PoE power supply during warm restart
Wide operating temperature: –30°C to +65°C; wall or pole mounting
Lifetime management on Ruijie Cloud, eWeb and Ruijie Reyee App

PoE Gigabit Weatherproof Outdoor SFP Reyee Ruijie

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-ES207GS-AC-OD_Datasheet.pdf Download

Overview of Reyee RG-ES207GS-AC-OD

The Reyee RG-ES207GS-AC-OD is a 7-port Gigabit cloud-managed outdoor switch with direct AC input, built for perimeter surveillance, parking lots, warehouses, compounds and farms. It provides 4 PoE+ ports with a 60 W budget, 1 Gigabit RJ45 port and 2 SFP uplinks that support ERPS ring redundancy over fiber. The all-in-one IP65 enclosure integrates the switch and power supply, with ±8 kV surge protection on service ports and an operating range of –30°C to +65°C for harsh outdoor conditions. Camera detection, PoE watchdog, cable test and uninterrupted PoE simplify troubleshooting, and it is managed for life on Ruijie Cloud. Mounts on walls or poles.

Technical Specifications – Reyee RG-ES207GS-AC-OD

Product Information

Product Category	Layer 2
Warranty	3 years

Port Specifications

Total number of RJ45 ports	5
Total number of optical ports	2
Number of 1GE SFP ports	2
Number of 10/100/1000BASE-T ports	5
Reset button	1

Power Supply and Consumption

PoE Out standard	PoE/PoE+ (IEEE 802.3af/at)
Number of PoE/PoE+ Out ports	4
PoE budget	60 W
PoE power pins	1–2 (+), 3–6 (-)
Power input	220 V AC power supply: Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Maximum input current: 1.5 A
Maximum power consumption	4.8 W (with no PoE load); 70 W (with full PoE load)
Power supply	Fixed power supply

System Specifications

Flash memory	8 MB
Forwarding rate	10.42 Mpps
Switching capacity	14 Gbps

Dimensions and Weight

Casing	Plastic
Product dimensions (W x D x H)	328 mm x 200 mm x 62.8 mm (12.91 in. x 7.87 in. x 2.47 in.)
Weight	1.38 kg (3.04 lbs) (without packaging materials)
Shipping weight	2.17 kg (4.78 lbs)

Environment and Reliability

Fan	Fanless design
Cooling	Natural cooling
Mounting options	Wall/Pole
Hot swapping of cables	Hot swapping supported by the service port and power connector
MTBF	200,000 hours
Operating temperature	–30°C to +65°C (–22°F to 149°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	10% RH to 90% RH (non-condensing)
Storage humidity	5% RH to 95% RH (non-condensing)
Altitude	–500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
ESD protection	Air discharge: 8 kV; Contact discharge: 6 kV
Surge protection	Service port: ±8 kV for common mode; Power connector: ±6 kV for common mode and ±6 kV for differential mode

Certification and Regulatory Compliance

EMC	EN 55032, EN IEC 61000-3-2, EN 61000-3-3, EN 55035, EN 300 386
Safety compliance	EN 62368-1, IEC 62368-1
Certification	CE, CB

Basic Configurations

PoE watchdog	Yes
Uninterruptible power supply upon warm start	Yes
Online upgrade	Yes

Ethernet Switching

Maximum number of VLANs	32
Maximum number of MAC address entries	2000
Interface flow control	Yes
IEEE 802.1Q VLAN	Yes
Static MAC address	Yes
Static aggregation	Yes
Inbound or outbound rate limiting based on interface traffic	Yes

Interface

Jumbo frame length (MTU)	9216 bytes
EEE	Yes
Cable test	Yes

IP Service

IPv4 ping	Yes
DNS client	Yes
DHCP client	Yes

Reliability

ERPS	Yes

Network Management and Monitoring

Mirroring	Yes
HTTP login	Yes
HTTPS login	Yes
SON	Yes
Camera detection	Yes
eWeb management	Yes
Ruijie Cloud management	Yes
Ruijie Reyee App management	Yes

Security

Port isolation	Yes
Broadcast storm control	Yes
Multicast storm control	Yes
Unknown unicast storm control	Yes
DHCP snooping	Yes
CPU Protection Policy	Yes

System Performance Capacity

Recommended camera limit	200W H265: 40; 400W H265: 20

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-RAP52-OD Reyee RG-RAP52-OD Wi-Fi 5 AC1300 Outdoor Access Point, IP65, Detachable Antennas, PoE ⃁ 566.53

RG-RAP62-OD Reyee RG-RAP62-OD Wi-Fi 6 AX3000 Indoor/Outdoor Access Point, IP65, Gigabit PoE ⃁ 774.43

RG-RAP6202(G) Reyee RG-RAP6202(G) Wi-Fi 5 AC1300 Outdoor Omni Access Point, IP68, 2 x GE, Mesh ⃁ 845.46

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.