[RG-ES116G-L] Reyee RG-ES116G-L 16-Port Gigabit Unmanaged Switch, Rack/Desk Metal, Port Isolation

Reyee RG-ES116G-L 16-Port Gigabit Unmanaged Switch, Rack/Desk Metal Case, Port Isolation

Part number RG-ES116G-L

16-port 10/100/1000 Mbps unmanaged non-PoE switch: 32 Gbps switching capacity, 23.8 Mpps
Unmanaged switch, which is visible on Ruijie Cloud (requires at least one managed switch on the same network)
Secure and stable CCTV network: flow control and port isolation via DIP switch
Recommended camera limit: 40 (200W H265) / 20 (400W H265)
10000-byte jumbo frames and 8000 MAC address entries
High-quality fanless metal design, desk or rack mounting (rack-mount brackets included)
Plug and play, energy saving, 3 years warranty

Gigabit Unmanaged Rack Mount Reyee Ruijie

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Official datasheetReyee_RG-ES116G-L_Datasheet.pdf Download

Overview of Reyee RG-ES116G-L

The Ruijie Reyee RG-ES116G-L is a 16-port 10/100/1000 Mbps unmanaged non-PoE switch in a metal casing that sits on a desk or mounts in a rack with the included brackets. With 32 Gbps switching capacity it suits offices, schools, hotels, clinics and CCTV systems that need many gigabit ports without configuration. A DIP switch offers Default, Flow Control Off and Isolation modes; in Isolation mode ports 1-14 are separated while ports 15 and 16 act as uplinks, improving CCTV security. The fanless design runs silently at 11 W maximum, and the switch is visible on Ruijie Cloud alongside a managed Reyee switch, with a three-year warranty.

Technical Specifications – Reyee RG-ES116G-L

Product Information

Product Category	Layer 2
Warranty	3 years

Port Specifications

Total number of RJ45 ports	16
Number of 10/100/1000BASE-T ports	16
DIP switch	Default Mode: all ports can communicate with each other, and flow control is enabled on all ports. Flow Control Off Mode: all ports can communicate with each other, and traffic control is disabled on all ports. Isolation Mode: ports 1 to 14 cannot communicate with each other, but can communicate with ports 15 and 16. Ports 15 and 16 can communicate with each other. The flow control function is enabled for all ports.

Power Supply and Consumption

Power input	220 V AC power supply: Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Rated input current: 0.6 A
Maximum power consumption	11 W
Power supply	Fixed power supply

System Specifications

Flash memory	4 MB
Forwarding rate	23.8 Mpps
Switching capacity	32 Gbps(bit/s)

Dimensions and Weight

Casing	Metal
Product dimensions (W x D x H)	280 mm x 125 mm x 43.6 mm (11.02 in. x 4.92 in. x 1.72 in.)
Weight	1.05 kg (2.31 lbs) (without packaging materials); 1.78 kg (3.92 lbs) (with packaging materials)
Shipping weight	1.78 kg (3.92 lbs)

Environment and Reliability

Fan	Fanless design
Cooling	Natural cooling
Mounting options	Desk/Rack
Hot swapping of cables	Hot swapping supported by the service port and power connector
MTBF	200,000 hours
Operating temperature	0°C to 45°C (32°F to 113°F)
Storage temperature	-40°C to +70°C (-40°F to +158°F)
Operating humidity	10% RH to 90% RH (non-condensing)
Storage humidity	5% RH to 95% RH (non-condensing)
Altitude	-500 m to +5,000 m (-1,640.42 ft. to +16,404.20 ft.)
ESD protection	Air discharge: 8 kV; Contact discharge: 6 kV
Surge protection	Service port: ± 4 kV for common mode; Power connector: ± 6 kV for common mode and ± 6 kV for differential mode

Certification and Regulatory Compliance

EMC	EN 55032, EN IEC 61000-3-2, EN 61000-3-3, EN 55035, EN 300 386
Safety compliance	EN 62368-1, IEC 62368-1
Certification	CE, CB

Ethernet Switching

Maximum number of MAC address entries	8000
Interface flow control	Yes
LLDP	No

Interface

Jumbo frame length (MTU)	10000 bytes

Security

Port isolation	Yes

System Performance Capacity

Recommended camera limit	200W H265: 40; 400W H265: 20

Package Contents

Contents	Device x 1; Rubber pad x 4; Screw: 6 x M4 x 8 mm cross recessed countersunk head screws; Power cord: 1 x 1.8 m (5.91 ft.); Rack-mount bracket x 2; User Manual x 1; Warranty Card x 1

Source: Ruijie Reyee official website and datasheet. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

RG-ES08G-L Reyee RG-ES08G-L 8-Port Gigabit Unmanaged Desktop Switch, Plastic Case, Plug and Play ⃁ 100.49

RG-ES105GD Reyee RG-ES105GD 5-Port Gigabit Unmanaged Desktop Switch, Metal Case, 802.3az ⃁ 107.41

RG-ES108GD Reyee RG-ES108GD 8-Port Gigabit Unmanaged Desktop Switch, Metal Case, 802.3az ⃁ 138.60

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.