Huawei SFP-10G-BXU1 10G SFP+ BiDi Single-mode Optical Transceiver, TX1270/RX1330nm, 10km, LC

Part number SFP-10G-BXU1

Optical transceiver, SFP+
10G speed
Single-mode module (single-fiber bidirectional, BiDi)
TX1270/RX1330nm wavelength
Up to 10km distance
LC connector
Standard: 10GBASE-BIDI
Industrial operating temperature: -40°C to +85°C (-40°F to +185°F)
Digital diagnostic monitoring (DDM) supported
Used in pairs with SFP-10G-BXD1

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Technical Specifications – SFP-10G-BXU1

Form Factor	SFP+
Application standard	10GBASE-BX
Connector type	LC
Optical fiber type	SMF
Working case temperature[°C(°F)]	-40°C to +85°C (-40°F to +185°F)
Digital diagnostic monitoring (DDM)	Supported
Transmission rate[bit/s]	10 Gbit/s
Target transmission distance[km]	Single-mode fiber: 10 km
Center wavelength[nm]	1330 nm (RX); 1270 nm (TX)
Maximum Tx optical power[dBm]	0.5
Minimum Tx optical power[dBm]	-8.2
Minimum extinction ratio[dB]	3.5
Rx sensitivity[dBm]	-14.4
Overload power [dBm]	0.5
Note	Supports the single-fiber bidirectional function. Single-fiber bidirectional (BIDI) optical modules must be used in pairs. For example, SFP-10G-BXU1 must be used with SFP-10G-BXD1.

Source: Huawei eKit official website. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

OSX010000 Huawei OSX010000 10G SFP+ Single-mode Optical Transceiver, 1310nm, 10km, LC ⃁ 948.00

OSX040N01 Huawei OSX040N01 10G SFP+ Single-mode Optical Transceiver, 1550nm, 40km, LC ⃁ 2,474.25

SFP-10G-BXD1 Huawei SFP-10G-BXD1 10G SFP+ BiDi Single-mode Optical Transceiver, TX1330/RX1270nm, 10km, LC ⃁ 1,138.50

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.