[S110-8T2ST] Huawei eKit S110-8T2ST 8-Port Gigabit Unmanaged Switch, 1 x GE RJ45 + 1 x GE SFP Uplinks

Huawei eKit S110-8T2ST 8-Port Gigabit Unmanaged Switch, 1 x GE RJ45 + 1 x GE SFP Uplinks

Part number S110-8T2ST

8 x 10/100/1000BASE-T ports, 1 x GE SFP port, 1 x 10/100/1000BASE-T port
Packet forwarding rate: 14.88 Mpps
Switching capacity: 20 Gbit/s

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Technical Specifications – S110-8T2ST

Dimensions without packaging (H x W x D)	Basic dimensions (excluding the parts protruding from the body): 35 mm x 210.0 mm x 130.0 mm (1.38 in. x 8.27 in. x 5.12 in.); Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 36.5 mm x 210.0 mm x 131.7 mm (1.44 in. x 8.27 in. x 5.19 in.)
Chassis height	0.8
Installation type	Desk mounting,Wall mounting
Weight without packaging	1.11 (2.45)
Typical power consumption	11
Static power consumption	4
100% power consumption	11
Maximum number of physical ports on the entire device	10
Long-term operating temperature	0°C to 40°C (32°F to 104°F) at an altitude of 0-1800 m (0-5906 ft.)
Restriction on the operating temperature variation rate	When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity	5% RH to 95% RH (non-condensing)
Long-term operating altitude	0–5000 m (0–16404 ft.)
Storage altitude	0-5000 m (0-16404 ft.)
Power supply mode	Power adapter
Rated input voltage	Power adapter input: 100–240 V AC; 50/60 Hz; Power adapter output: 56 V DC
Input voltage range	Power adapter input: 90 V AC to 264 V AC; 47 Hz to 63 Hz
Service port surge protection	Common mode: ±4 kV
Power supply surge protection	Differential mode: ±6 kV; common mode: ±6 kV

Source: Huawei eKit official website. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

S110-16T2S Huawei eKit S110-16T2S 16-Port Gigabit Unmanaged Switch, 2 x GE SFP ⃁ 630.00

S110-24T2SR Huawei eKit S110-24T2SR 24-Port Gigabit Unmanaged Switch, 2 x GE SFP ⃁ 775.50

S110-8P2ST Huawei eKit S110-8P2ST 8-Port Gigabit PoE+ Unmanaged Switch, 1 x GE RJ45 + 1 x GE SFP Uplinks, 124W ⃁ 834.00

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.