[AP160] Huawei eKit AP160 Wi-Fi 6 Wall Plate Access Point, 1.775 Gbps, 86 x 86 mm, 128 Users

Huawei eKit AP160 Wi-Fi 6 Wall Plate Access Point, 1.775 Gbps, 86 x 86 mm, 128 Users

Part number AP160

Wall plate 86x86 AP
802.11ax (Wi-Fi 6)
1.775 Gbps device rate
Dual-radio
48 access users recommended
Max. 128 access users
20 dBm transmit power
Smart antenna
15 m optimal coverage range

Ask on WhatsApp Quote for installers and contractors

Delivery within 4–10 business days across Saudi Arabia
Warranty according to the manufacturer
Tax invoice with every order
Technical support before and after purchase

Not sure this model fits your setup? Read the buying guide

Technical Specifications – AP160

Wi-Fi standard	2.4G: 802.11b/g/n/ax; 5G: 802.11a/n/ac/ac Wave 2/ax
Installation Type	Junction Box (86 mm)
Optimal Signal Distance (m)	15
Max Number of Access Users	128
Recommended Number of Access Users	48
Maximum number of physical ports on the entire device	GE (RJ45) x 2, 10M/100M/1000M auto-sensing
Device Rate	1.775 Gbps
Radio number	2
Maximum channel bandwidth [MHz]	Radio 0 (2.4 GHz): 40 MHz; Radio 1 (5 GHz): 80 MHz
Maximum transmit power	2.4G: 17 dBm/chain; 20 dBm (combined power); 5G: 17 dBm/chain; 20 dBm (combined power)
MIMO spatial streams	Radio 0 (2.4 GHz): 2x2; Radio 1 (5 GHz): 2x2
Maximum power consumption [W]	9.1
Input voltage range [V]	PoE: 802.3af
Dimensions without packaging (H x W x D) [mm(in.)]	86 mm x 86 mm x 42.5 mm (3.39 in. x 3.39 in. x 1.67 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	98 mm x 117 mm x 73 mm (3.86 in. x 4.61 in. x 2.87 in.)
Weight without packaging [kg(lb)]	0.14 kg (0.31 lb)
Weight with packaging [kg(lb)]	0.24 kg (0.53 lb)
Long-term operating temperature [°C(°F)]	0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Long-term operating relative humidity [RH]	5% RH to 95% RH, non-condensing
Radio interface	Built-in smart antennas
Antenna gain	2.4 GHz: 3 dBi/chain (peak value); 3 dBi (combined gain); 5 GHz: 2 dBi/chain (peak value); 1 dBi (combined gain)
Operating frequency band	2.4GHz,5GHz
Power supply mode	PoE
Service port surge protection	PoE port: Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion C
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating altitude [m(ft.)]	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa]	53kPa - 106kPa ETSI 300 019-2-3
Ground	Floating ground
Frequency stability [ppm]	+/-20

Source: Huawei eKit official website. Specifications are subject to change by the manufacturer.

Equipping a project with several devices?We recommend the right models and prepare a formal quotation.

Request a quote

From the same family

Suggested alternatives

AP162E Huawei eKit AP162E Wi-Fi 6 Wall Plate Access Point, 2.975 Gbps, 86 x 86 mm, 128 Users ⃁ 691.50

AP265E Huawei eKit AP265E Wi-Fi 6 Wall Plate Access Point, 2.975 Gbps, 4 x GE Ports ⃁ 691.50

AP266 Huawei eKit AP266 Wi-Fi 6 Wall Plate Access Point, 2.975 Gbps, 4 x GE Ports, PoE ⃁ 835.50

PRACTICAL ANSWERS

Network planning questions

Should I choose a router, a switch or an access point?

Start with the task: connecting networks, adding wired device ports, or providing wireless coverage. A single installation may need more than one device type. Share a site diagram and device list so the proposed roles and connections are clear.

Why is wireless coverage weak in some rooms?

Check the access point location, building layout, obstacles and the number of active devices. Measure coverage where people actually work before choosing extra equipment; changing the internet package alone may not address a coverage problem.

How do I select a switch for powered network devices?

List the devices to be connected and check each device’s power requirements against the switch’s per-port capability and total documented power budget. Also review uplink capacity and reserve ports for the expansion you actually expect.

Can the guest network be separated from business devices?

Define which devices and services guests should be able to reach, then check whether the router, switch and access points support the required separation. Test the resulting access rules; a different wireless network name alone is not the acceptance test.

What information helps plan a network upgrade?

Provide floor plans, current equipment models, internet connections, cabling details and peak device counts. Describe the applications that matter most and the observed problem, such as disconnections or slow local file access.

How should network performance be checked after installation?

Agree on the locations and representative workloads to test, then record wired and wireless results separately. Check connectivity, coverage and access rules during normal use, and retain a diagram and configuration backup for support.